03
- Products (37)
- Blogs (1)
- Videos (8)
- Newsroom (2)
- Resource Center (1)
- Home
- >
- Customer Favorites
- >
- 03
Compatible with models 1332 and 1432, this carrier strip kit is sold separately from D-Pack hardware kits and optimizes pocket and flipper door installation. Each kit includes two zinc hinge carrier strips, 3 stainless steel connector clips, six #8 x ⅜” black pan head screws (without hinge base plate), six #8 x ⅝” zinc flat head screws (with hinge base plate), and one “Caution” sticker.
For silent drawers that run deep. Equipped with polymer bearings and premium progressive movement, the 4033 model provides ultra-quiet, ultra-smooth movement for drawers crafted in furniture and built-in casework. * Supports loads up to 100 lbs. * For drawers 18” wide * For additional technical information see below Perfect for storage in offices, retail spaces, homes, and workspaces, the 4033 is commercial-grade motion hardware that offers silenced operation, precise vertical adjustment, and…
Above and beyond, over and out. Offering over-travel and ultra-quiet progressive movement to boot, the 4035 model is your go-to motion hardware contender for wooden furniture and cabinet frames, including built-in storage casework. * Supports loads up to 100 lbs. * For drawers up to 18” wide * For additional technical information see below Designed with polymer ball bearings, the 4035 ensures silenced operation as well as ease in the form of a rail mount/disconnect. Our handy hold-in detent…
Lending a hand with inset installation for thicker pocket and flipper door applications, this optional clip-on hinge kit is compatible with Accuride models 123 and 1234. Each kit includes two zinc 40mm inset clip-on hinges, 2 base plates, four #6 screws, four #8 screws, and one “Caution” sticker.
Compatible with our 1332 solution and accommodating pocket doors ¾” to 13/16” thick, this hinge kit provides the extra tools you need for an inset installation. Each order includes two 35mm salice black clip-on hinges, two 3mm mounting base plates, two 3mm hinge base spacers, two hinge arm cover caps, four #6 x ⅝” Phillips flat head screws, and one “Caution” door sticker.
Compatible with the 3160EC Eclipse Undermount slide for drawers up to 42” wide, this drawer stabilizer kit provides strength and stability for wider drawers while also eliminating racking, side-to-side movement, and hardware failure. Comprised of two stabilizer carrier strips, the installer attaches the included connector clips and pulley bracket for a trouble-free process and extra-durable finished fixture.
Test Description
Precision and ease collide with our Eclipse Jig! Compatible with our 3135EC undermount solution, the Eclipse Drill Jig lends an extra hand for seamless installation, aiding in lever-disconnect assemblies, drawer hooks, front face frame holes, and front side mounts (37mm). For optimal ease and outcomes, we recommend also using the 3/32” Drill Bit (in the optional Eclipse Tool Kit) to control drill depth when drilling.
Extra ergonomic. AWI and BHMA certified, the CBERGO-Tray 300 includes a gel palm rest and rear storage compartments to bring added comfort and order to your home and office computer stations. Including hold-in, hold-out, and intermediate detents, this motion hardware ensures stable positioning and flawless performance. * Full-extension * Unit width at 29.6” * For additional technical information see below On top of a built-in cable management system for organization and ease, the CBERGO-Tray 300…
Compatible with our 1332 solution and accommodating pocket doors ¾” to 13/16” thick, this hinge kit provides the extra tools you need for an inset installation. Each order includes two 35mm salice zinc clip-on hinges, two 3mm mounting base plates, two 3mm hinge base spacers, two hinge arm cover caps, four #6 x ⅝” Phillips flat head screws, and one “Caution” door sticker.
-
Partial extension with premium movement to boot. Offering a low-profile and polymer ball bearings for quieter operation, the 2037 model is your go-to motion hardware for light-duty box drawers in kitchen cabinetry, desks, office furniture, and workspace fixtures. * Supports loads up to 50 lbs. * For drawers up to 12” * For additional technical information see below Simplified installation for maximum up-time in the form of a rail mount/disconnect, the 2037 solution also includes a Cam drawer…
Working with both CBHAND kits, one order includes two stainless steel rods that aid in lock-in and/or lock-out conversions for models 3640A, 7950, 7957, 9301, or other slides with cross-sections of .75” or more.
