30” Drawer Slides
- Products (26)
- Videos (3)
- Newsroom (1)
- Home
- >
- Customer Favorites
- >
- 30” Drawer Slides
- >
- 36"
- >
- 22"
- >
- Side Mount
-
…and even ATMs. * Supports loads up to 600 lbs. * For drawers up to 42” wide with slide lengths up to 60" * 9301E accessory bracket kits offer bottom and side mount installation options * For additional technical information see below Tested for a total of 50,000 cycles at maximum load capacity, the 9301E solution extends unfailing strength and reliability for a full breadth of heavy-duty storage needs, setting a high bar in quality and durability for competing slides in its weight class.
…* Easy to install * Stainless-steel construction * Full-extension design (over-travel upon request) * Max Load rating: 125 lbs. * Available in even lengths 16" - 30" * Dishwasher safe * NSF certified The Accuride ST8200 is an ideal movement solution for refrigerated drawers in food service, food prep tables, and heated and warming drawers. This Accuride solution comes NSF-certified and backed by Accuride's Limited Lifetime Warrany. (For a bottom-mount version, see the ST8201 Product Detail Page)
…A non-disconnect solution for added security in high-production and highly technical environments, the 3301 model also includes your choice of a hold-in detent to prevent drawer roll-out and bounce-back, as well as an additional kit for electronic enclosure chassis mounting. * Supports loads up to 150 lbs. * Tested drawer width at 16” * For additional technical information see below Built for over-travel, the 3301 supplies extended, easy-access to stored items in a wide variety of uses and…
-
…Heavy-Duty Full-Extension Slide can be side- or flat-mounted in hardware and fixtures for cookware, toolboxes, equipment storage, and so much more. * Side-mount load capacity up to 350 lbs. * Flat-mount load capacity up to 150 lbs. * For drawers up to 42” wide * For additional technical information see below Designed with a bridged ball retainer that keeps your sliding hardware in sync, the 7950 eliminates inconvenient migration common in more inferior ball bearing slides, and thus brings…
-
…9308-E5. The 9308-E5 is a kit that includes one right-handed 9308E Heavy-Duty Lock-In & Lock-Out and one 9301E Heavy-Duty standard slide. * Supports loads up to 600 lbs. * Includes one 9308E (right-handed) and one 9301E slide * Platform bracket kit (OPTIONAL) allows for bottom and side mount applications. From heavy-duty fixtures and appliances around the home to drawers and trays for gear on utility and emergency vehicles, luxury RVs, or overland trucks and trailers, our 9308-E5 is a convenient…
…smart option for movement in commercial kitchen appliances. The NSF-certified roller-bearing slide is easy to install and needs little maintenance. Over two inches of extra travel gives you full reach of items in the back of a drawer or tray. The extra room makes searching, sorting, and retrieving items easier, saving time (and money). The ST8210 also has a self-close and auto lock-in design to ensure drawers close properly. * Side-mount * For loads up to 230 lbs * Over-travel design (2.36") *…
-
…with a low profile. Handling heavy-duty, industrial loads, the 301 model also includes over-travel for complete, easy-to-reach access along with an optional bracket kit for electronic enclosure mounting. * Supports loads up to 175 lbs. * Tested drawer width at 16” * For additional technical information see below Non-disconnect motion hardware for added safety in professional workspaces, the 301 is an adept solution for medical equipment, EIA rack-mounted chassis, data processing, mechanical…
…offers the same security and endurance fit with stainless steel ball bearings and lubricated with food-safe grease for cabinetry in a wide range of spaces--industrial, outdoor, commercial, and residential. * Supports loads up to 143 lbs. * Tested drawer width at 18” * For additional technical information see below A non-disconnect solution for added safety and assurance, the SS0330 also boasts the same corrosion-resistant coating, making it the perfect motion hardware for fixtures subject to…
…lock-out, front latch disconnect, and over-travel for easy, extended access to stored items, the 305A-LR model is superior motion hardware for just about any industrial fixture--even photographic equipment. * Supports loads up to 140 lbs. * Tested drawer width at 16” * For additional technical information see below With an optional electronic enclosure bracket kit available for EIA rack-mount chassis, the 305A-LR allows for recessed mounting behind cabinet rails, reducing side-space requirements…
-
…for pull-out cases, spice racks, storage bins, and entertainment centers, the 301-2590 remains a medium-duty, versatile solution--giving you full-access to hard-to-reach items with its premium over-travel. * Supports loads up to 155 lbs. * For drawers up to 16” wide * For additional technical information, see below Including attached brackets that allow for mounting on the top or bottom surfaces of cases, the 301-2590 is also engineered with our handy hold-in detent for enhanced function,…
-
Widen your horizons with quality motion hardware. Complete with a simple front latch disconnect and our handy lock-out feature that holds drawers, trays, and chassis solidly positioned when open for extended, easy-access, the 3307 model enhances a bevy of industrial, electronic, and medical fixtures or equipment. * Supports loads up to 150 lbs. * Tested drawer width at 16” * For additional technical information see below This motion hardware's over-travel ability consistently ensures that items,…
-
…pairs with a rail mount/disconnect and polymer ball bearings for smoother-than-ever, quiet operation in business, office, or residential cabinetry and fixtures. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below Best suited for wider drawers in desks, commercial storage, and credenzas, the 3017 also supplies full-access to stored items with its over-travel feature and prevents drawer roll-out and bounce-back using a handy hold-in detent.
