3832ec Face Frame Bracket
- Products (76)
- Blogs (1)
- Videos (7)
- Newsroom (3)
- Home
- >
- Customer Favorites
- >
- 3832ec Face Frame Bracket
- >
- Less than .50"
Return to 116RC Product Detail Page Extra protection + Quality assurance. Engineered specifically for the 116RC model, this recycling bracket protects the carriages on your linear track system when a damper (CB0116-DAMP) is installed to cushion a fixture's end of travel. One recycling bracket is needed for each recirculating ball carriage.
-
…a flock of handy features including over-travel, narrow side space, and enhanced friction movement for superior efficiency and performance. * Supports loads up to 100 lbs. * Tested chassis width at 16” * For additional technical information see below This electronic enclosure motion hardware comes with a fixed front bracket and adjustable rear bracket for added versatility and precision, while a premium lock-out feature ensures that chassis remains solidly positioned for regular maintenance.
-
Our friction disconnect puts in the extra elbow grease, so you don’t have to. Specially developed and engineered for suspended drawers beneath desks or tabletops, the 2006 model offers a standard ¾-extension and simple, fixed height bracket installation. * Supports loads up to 45 lbs. * For drawers up to 16” wide * For additional technical information see below Equipped with a more accessible than ever friction disconnect, this suspended solution remains easy to install, disassemble, and…
…moisture or high levels of humidity--including but not limited to industrial machines, outdoor hardware, and commercial or residential kitchens. * Supports loads up to 100 lbs. * For drawers up to 18” wide * For additional technical information see below Non-disconnect for added safety, the SS2028 also includes a standard ¾-extension and a hold-in detent to keep hardware securely closed and prevent drawer failure. Its narrow cross-section width makes this solution for frames of different sizes.
-
Bringing maximum versatility and utility to electronic enclosures, the 2907WB includes reversible mounting brackets and a slide-to-chassis hole pattern that allows for more options in positioning chassis and mounting configurations. * Supports loads up to 120 lbs. * Tested chassis width at 16” * Designed for 1U-3U chassis * For additional technical information see below With a unique thumb screw fastener, this slide adapts to round, square, or tapped holes on rails and provides tool-less pin…
-
…stability during maintenance and service for electronic enclosures. * Supports loads up to 115 lbs. * Tested chassis width at 16” * Designed for 1U-3U chassis * For additional technical information see below Offering over-travel for full wiring and connection access as well as adjustable mounting brackets to accommodate a wide array of depths, rail configurations, and hole styles in enclosures and racks, Model 2907 maximizes space and prioritizes ease without sacrificing solid load capacities.
-
…and writing shelves, pencil drawers, and anywhere else an adjustable-height shelf or shallow drawer is suspended over or under a work surface that’s mounted on inner member tabs. * Supports loads up to 75 lbs. * For drawers up to 16” wide * For additional technical information see below Equipped with a standard ¾-extension and narrow side-space for added flexibility to compatible frames, the 2019 also includes a hold-out detent that ensures pull-out shelves stay solidly positioned when open.
