Accuride Slides
- Products (42)
- Blogs (37)
- Videos (30)
- Newsroom (48)
- Resource Center (11)
The 118RC Damper cushions that last 2 inches of your sliding door or panel’s movement when equipped with the Accuride 118RC Medium-Duty Linear Track System. This eliminates hard and loud impacts when your door hits the end of the track. The Damper works in tandem with the 118RC Recycling Bracket. Both are simple clip-on accessories: No screws needed!
The Accuride LA1815 is a pre-assembled linear track system for light-duty applications. Installers simply mount the track in place onto the cabinet/outer member, then mount a sliding door, panel, or over onto the cassette. * Max Load Rating (Static): 18 lbs. * Max Load Rating (Dynamic): 7 lbs. As with all Accuride products, the LA1815 comes backed by a Limited Lifetime Warranty.
The 118RC End Stop halts your sliding door or panel to prevent it from damaging surfaces outside the edge of a linear track. This End Stop is a necessary part of the broader Accuride 118RC Medium-Duty Linear Track System.
-
Ensure cabinet security and smooth, lasting drawer movement with the Senseon 38EL. The 38EL is a low-voltage electronic lock mounted onto a premium commercial-grade Accuride 3832 Drawer Slide-creating a slim and compact form that adapts to fortify virtually any cabinet design. * Voltage: 5v - 24v * Lock Dimensions: 2.18" x 2.79" x 0.50" * Compatible System(s): Senseon Core and Plus * Applications: Drawers and storage compartments The 38EL comes in three variants: standard, Touch-Release…
The 115RC Brackets let installers mount sliding doors onto an Accuride 115RC Linear Track System. Installers simply mount the brackets onto 115RC cassettes with loads distributed evenly to eliminate unwanted torsional effects and ensure smooth movement. The brackets accommodate various door widths and come in three options for door thicknesses up to 40 mm (or 1.57").
…applications like drawers and trays inside utility, emergency, and overland vehicles. * Accommodates drawers up to 60” wide * Cut-to-length stainless steel rods allow for varying drawer widths (ordered separately) * For additional technical information see below Compatible with Accuride models 3640A, 7950, 7957, 9301, and other slides with cross-sections greater than 0.75”, the CBHAND gives your heavy-duty hardware extra ease with a one-hand operation that’s activated by a central push button.