Accuride
- Products (47)
- Blogs (69)
- Videos (35)
- Newsroom (75)
- Resource Center (27)
…the tools you need to drill and pre-drill holes and mounting locations for your frames and fixtures. Setting up your project for easy success, the Eclipse Tool Kit is equipped with the following helpers: * 3/32” Drill Bit: This bit works with the Accuride Drilling Jig (4180-0568-XE) to pre-drill holes for disconnect levers. * 4 + ¾” Drill Extension: Paired with the 3/32” Drill Bit, this extension improves access when pre-drilling disconnect lever holes at the required 10-degree angle. * #2 x 4”…
-
Go with the Accuride Original line of motion hardware. Complete with enhanced strength and movement, full-extension, and a lever-disconnect, the 3832E model is a classic drawer slide that fits a wide range of uses including but not limited to: pull-out shelves, kitchen utensil drawers, and point-of-sales trays. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below A patented Cam Drawer Adjust allows for precise vertical adjustment, while a…
Achieve a new kind of effortless with this Accuride Original. Activated by a push that requires just 5 lbs. of ADA-compliant force, the 3832ETR model propels your hardware into the future. Eliminating the need for knobs or handles, this specialty slide creates sleek cabinetry matched with seamless performance. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below Adding ease to a wide array of spaces, the 3832ETR is specially optimized for…
-
…grill stations, and more! * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below Comprised of a stainless-steel ball retainer, ball bearings, and rivets, the CH3832E also includes silenced operation as well as a hold-in detent to prevent drawer roll-out or bounce-back, guaranteeing the same Accuride standard of high-performance for your outdoor, humid spaces. Also BHMA & AWI certified for third-party validation and quality assurance.
The Accuride 1532 Pocket Door System is unrivaled in its design. Engineered for all-around excellence, this system uses a cassette that glides along a precision track to give your pocket door the most refined movement possible. The 1532 is easy to install with no carrier strip. Product selection is also made simple with only two essential parameters: door height and thickness. * Max Door Weight: 100 lbs. * Max Door Height: 118 in. * Max Door Width: 39 in. * Max Door Thickness: 1.25 in. A novel…
The 3160EC is a commercial-grade undermount designed to support upscale and ultra-wide drawers up to 5 ft. wide. Crafted by the industry’s leading innovators at Accuride, the 3160EC is the only undermount slide designed to support applications up to 60 in. wide. Other benefits include: * Supports loads up to 100 lbs. * Includes Easy-Close feature * Works on drawers 30-40 in. standard * Works on drawers 41-60 in. with companion kit (not included) The 3160EC is the perfect movement solution to…
The companion slide to the 9328E model. A member of the newly enhanced and super-strong 9300 series from Accuride, the 9322E is the specially crafted, pocket & bayonet, non-locking motion hardware that delivers guidance to the 9328E’s lock-in and lock-out capabilities. * Supports loads up to 600 lbs. * Tested drawer width up to 32” * For additional technical information see below Providing heavy-duty, full-extension assistance to industrial and vehicle hardware and equipment, this companion…
-
The Accuride 3932EC is a soft-close version of the new 3932 Medium-Duty Slide. Like our popular 3832EC Easy-Close, the 3932EC uses a 1/2-inch cross-section. This shared cross-section lets you use the 3932EC alongside (or instead of) its light-duty counterpart for heavier or wider drawers. * Includes soft-close action * Handles load up to 150 lbs. * Supports drawer widths up to 36 in. * Made with High-Strength Low-Alloy steel The 3932EC is an ideal movement solution for home and office cabinetry,…
-
The Accuride 3932 is a new medium-duty counterpart to the popular light-duty 3832. Like our popular 3832E Classic, the 3932 uses a �-inch cross-section. This shared cross-section lets you use the 3932 alongside (or instead of) its light-duty counterpart for heavier or wider drawers. * Handles load up to 150 lbs. * Supports drawer widths up to 36 in. * Made with High-Strength Low-Alloy steel The 3932 is an ideal movement solution for home and office cabinetry, metal enclosures, and medical carts.…
-
The 3306DO is a medium-duty and over-travel slide perfect for use in transportation, workstations, and kiosks. The 3306DO has a lock-in feature to keep drawers closed in transit, and detent-out to hold drawers open when needed. * Supports loads up to 150 lbs. * 1" over-travel * Lock-in feature * Hold-out detent The 3306DO comes tested at 10,000 cycles and includes a Limited Lifetime Warranty. For an alternative with lock-out, see the Accuride 3308.
…applications like drawers and trays inside utility, emergency, and overland vehicles. * Accommodates drawers up to 60” wide * Cut-to-length stainless steel rods allow for varying drawer widths (ordered separately) * For additional technical information see below Compatible with Accuride models 3640A, 7950, 7957, 9301, and other slides with cross-sections greater than 0.75”, the CBHAND gives your heavy-duty hardware extra ease with a one-hand operation that’s activated by a central push button.
