Bracket
- Products (57)
- Blogs (1)
- Videos (3)
- Newsroom (1)
Mounting bracket kit for 1145 or 1155 Flipper Door Slides
Mounting bracket kit for 1145 or 1155 Flipper Door Slides
Rear bracket for installing 3832 Touch-Release slides into face frame cabinets. Each kit includes: * Compatible with 3832ETR and 3832EHDTR
A bracket kit for flush inset drawer fronts. Compatible with our 3135EC undermount solution, this kit includes one pair of bottom inset bracket assemblies in a zinc finish, adding ease and precision to alternative frames and mounting styles. For thorough installation, a rear face frame bracket (4180-0656-XE) is also required. Along with both brackets, this single kit also comes with two each #8-32 flat head screws, and an installation guide inside a polybag. Cabinet mounting screws are not…
Made to accompany our 3135EC, this bracket kit aids in easy-access installation for rear-facing frames and fixtures in need of concealed hardware. Including two rear brackets with a clear zinc finish, this kit also contains six #8 x ⅝” screws and an installation guide--all inside a polybag. This kit is also RoHS-compliant and available for bulk orders.
Inset installation made simpler! Engineered for use with our 3135EC Eclipse Undermount solution, this bracket kit assists with implementing a flush inset drawer front in need of concealed hardware. Complete with 2 RoHS-compliant inset assemblies with a zinc finish, two #8 32 flat head screws, and an installation guide--all inside a polybag--this kit is also available for bulk orders, fulfilling projects of any scale.
The 115RC Brackets let installers mount sliding doors onto an Accuride 115RC Linear Track System. Installers simply mount the brackets onto 115RC cassettes with loads distributed evenly to eliminate unwanted torsional effects and ensure smooth movement. The brackets accommodate various door widths and come in three options for door thicknesses up to 40 mm (or 1.57").
The 115RC Brackets let installers mount sliding doors onto an Accuride 115RC Linear Track System. Installers simply mount the brackets onto 115RC cassettes with loads distributed evenly to eliminate unwanted torsional effects and ensure smooth movement. The brackets accommodate various door widths and come in three options for door thicknesses up to 40 mm (or 1.57").
The 115RC Brackets let installers mount sliding doors onto an Accuride 115RC Linear Track System. Installers simply mount the brackets onto 115RC cassettes with loads distributed evenly to eliminate unwanted torsional effects and ensure smooth movement. The brackets accommodate various door widths and come in three options for door thicknesses up to 40 mm (or 1.57").
A pair of rear brackets for adapting the 3800 series of slides into fame frame cabinetry. Compatible models include: * 3832E * 3832EDO * 3832ESC * 3832EHDSC * 3834E * 3834ESC
-
Stainless steel hardware with an easy-going side. Specially engineered with corrosion-resistant stainless steel and easy-install, L-shaped brackets with locator pins for a seamless disconnect, the SS5322 is the ideal solution for fixtures in commercial kitchens and industrial or outdoor cabinetry exposed to the elements. * Supports loads up to 265 lbs. * For drawers up to 18” wide * For additional technical information see below Equipped with a handy hold-in detent that eliminates any chance of…
…for our 116RC Heavy-Duty Linear Track System, this damper cushions and decelerates the last 1.6” of your hardware’s travel for reduced vibration and migration while also providing a smooth, gentle return every time. With the use of this optional damper, end stops are no longer required. However, recycling brackets (SS0166-BRKT01RC) will be needed to protect the carriages, and sliding door fixtures will require a separate bracket kit. Your hardware deserves every bit of convenience and ease.
