D Pack Hardware Kit
- Products (154)
- Blogs (4)
- Videos (13)
- Newsroom (11)
- Resource Center (20)
- Home
- >
- Customer Favorites
- >
- D Pack Hardware Kit
- >
- 34"
- >
- 28"
- >
- 301 - 500 lbs
- >
- 0 - 100 lbs
-
Our Accuride Original slide packed with a little more common sense. The 3832EDO is specially crafted with longer spacers and additional bearings, while also designed with a hold-out detent to keep pull-out surfaces and drawers solidly positioned. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below Backed by AWI & BHMA certification, this motion hardware is a beautiful addition to kitchens, workspaces, and retail stores. With easy access…
…the only undermount slide designed to support applications up to 60 in. wide. Other benefits include: * Supports loads up to 100 lbs. * Includes Easy-Close feature * Works on drawers 30-40 in. standard * Works on drawers 41-60 in. with companion kit (not included) The 3160EC is the perfect movement solution to boutiques, upscale residences, and fine galleries. The 3160EC performance is certified by Architectural Woodwork Institute (AWI) and the Builders Hardware Manufacturers Association (BHMA).
Stainless steel hardware with a narrow profile. With a corrosion-resistant coating, the SS2028 model is perfect for fixtures that need to withstand moisture or high levels of humidity--including but not limited to industrial machines, outdoor hardware, and commercial or residential kitchens. * Supports loads up to 100 lbs. * For drawers up to 18” wide * For additional technical information see below Non-disconnect for added safety, the SS2028 also includes a standard ¾-extension and a hold-in…
-
…up to 42" wide, our 7950 Heavy-Duty Full-Extension Slide can be side- or flat-mounted in hardware and fixtures for cookware, toolboxes, equipment storage, and so much more. * Side-mount load capacity up to 350 lbs. * Flat-mount load capacity up to 150 lbs. * For drawers up to 42” wide * For additional technical information see below Designed with a bridged ball retainer that keeps your sliding hardware in sync, the 7950 eliminates inconvenient migration common in more inferior ball bearing…
-
…Add a bit of much-needed ease to hardware in the home, industrial workspaces, or institutional equipment. * Supports loads up to 100 lbs. * For drawers up to 16” wide * For additional technical information see below Engineered with the end-user in mind, the 3832EC’s Easy-Close mechanism remains partially shielded to prevent small debris particles from interfering with operation, optimizing it for long-term, maintenance-free use. This specialty motion hardware ensures that the drawer doesn’t pull…
…super-strong 9300 series from Accuride, the 9322E is the specially crafted, pocket & bayonet, non-locking motion hardware that delivers guidance to the 9328E’s lock-in and lock-out capabilities. * Supports loads up to 600 lbs. * Tested drawer width up to 32” * For additional technical information see below Providing heavy-duty, full-extension assistance to industrial and vehicle hardware and equipment, this companion slide produces the same consistent movement as the 9328E due to new bridged…
…in metal hardware and fixtures, the 9328E enables tool-less installation that’s labor-saving and cost-effective for equipment drawers or trays in various large vehicles intended for emergency, utility, hazmat, or recreational use. * Supports loads up to 360 lbs. * Tested drawer width up to 32” * For additional technical information see below Fit with an enhanced lock-in and lock-out designed for added reliability, the 9328E also contains a front-latch release that locks hardware in open or…
-
Motion hardware 2.0. Providing ¾-extension and two-way access for pass-through shelves, kitchen islands, and medical carts, the 2002 model enhances any home or workspace with double the amount of function and chic. * Supports loads up to 50 lbs. * For drawers up to 12” wide * For additional technical information see below Including a center detent that keeps hardware solidly positioned when closed from either direction, this double-extension solution is also fit with tabs for quick mounting of…
-
Put a spring in your hardware’s step. Engineered with a unique Action-Assist feature that employs spring action, the 3832AA is a sliding solution that lends a hand in opening and closing light-duty drawers or trays. Simple as ever, the end-user starts the action with minimal pull-force, and the slide finishes it. * Supports loads up to 100 lbs. * For drawers up to 16” wide * For additional technical information see below Designed with a neutral zone at the midpoint of travel that ensures steady…
Stainless steel + super-strength. Complete with corrosion-resistance and a heavy-duty load rating, the SS5321 is go-to motion hardware for outdoor fixtures, watercraft, as well as marine and industrial storage. * Supports loads up to 352 lbs. * Tested drawer width at 18” * For additional technical information see below With the added convenience of over-travel for full-access to stored items, the SS5321 also includes a hold-in detent to prevent drawer roll-out and bounce-back, providing reliable…
Behold your new superhero space-saving slide for wider drawers. From shelves for cookware or dry goods to toolboxes and under-the-stairs storage, the 7957 model offers smooth and sturdy hardware in homes, micro-living spaces, and industrial locations. * Side-mount load capacity up to 350 lbs. * Flat-mount load capacity up to 150 lbs. * For drawers up to 42" wide * For additional technical information see below With versatile mounting options and a handed lever disconnect for easy disassembly and…
-
…in office storage while also bringing its smooth and silent motion to box drawers in kitchens, bathrooms, and other establishments. * Supports loads up to 100 lbs. * For drawers up to 16” wide * For additional technical information see below With front face frame mounting holes and a push latch disconnect, installation, disassembly, and reinsertion remain effortless. This light-duty yet robust hardware solution is also fitted with a hold-in detent to prevent drawer roll-out and bounce-back.
