Drawer
- Products (105)
- Blogs (30)
- Videos (23)
- Newsroom (16)
- Resource Center (6)
Precision and ease collide with our Eclipse Jig! Compatible with our 3135EC undermount solution, the Eclipse Drill Jig lends an extra hand for seamless installation, aiding in lever-disconnect assemblies, drawer hooks, front face frame holes, and front side mounts (37mm). For optimal ease and outcomes, we recommend also using the 3/32” Drill Bit (in the optional Eclipse Tool Kit) to control drill depth when drilling.
Come extra-prepared with tools for your undermount solution. Compatible with our 3135EC model, the Eclipse Tool Kit quickens and simplifies drawer box prep with all the tools you need to drill and pre-drill holes and mounting locations for your frames and fixtures. Setting up your project for easy success, the Eclipse Tool Kit is equipped with the following helpers: * 3/32” Drill Bit: This bit works with the Accuride Drilling Jig (4180-0568-XE) to pre-drill holes for disconnect levers. * 4 + ¾”…
…kit for electronic enclosure mounting while also enhancing a versatile array of fixtures, including but not limited to: toolboxes, mechanical devices, point-of-purchase displays, and medical equipment. * Supports loads up to 108 lbs. * Tested drawer width at 16” * For additional technical information see below Equipped with steel ball bearings and non-disconnect for an added element of safety, the 201 comes with Accuride’s trademark clear zinc finish for long-lasting, high-performance motion…
-
…wider drawers. Expertly engineered with extra features such as a lock-out and lever-disconnect, the 3607 model lends itself to heavy-duty loads for shelving units, bulk storage bins, deep trays, and storage drawers in homes and commercial spaces. * Supports loads up to 273 lbs. * For drawers up to 42” wide * For additional technical information see below Offering full-extension to make stored items and equipment fully available, the 3607 solution’s lock-out feature also keeps drawers and trays…
…offers the same security and endurance fit with stainless steel ball bearings and lubricated with food-safe grease for cabinetry in a wide range of spaces--industrial, outdoor, commercial, and residential. * Supports loads up to 143 lbs. * Tested drawer width at 18” * For additional technical information see below A non-disconnect solution for added safety and assurance, the SS0330 also boasts the same corrosion-resistant coating, making it the perfect motion hardware for fixtures subject to…
…lock-out, front latch disconnect, and over-travel for easy, extended access to stored items, the 305A-LR model is superior motion hardware for just about any industrial fixture--even photographic equipment. * Supports loads up to 140 lbs. * Tested drawer width at 16” * For additional technical information see below With an optional electronic enclosure bracket kit available for EIA rack-mount chassis, the 305A-LR allows for recessed mounting behind cabinet rails, reducing side-space requirements…
-
…204A-LR model also includes our handy lock-out feature, making it go-to motion hardware for mobile fixtures, medical carts, pharmaceutical trays, and high-production, industrial equipment or storage. * Supports loads up to 140 lbs. * Tested drawer width at 16” * For additional technical information see below Because of its lock-out capability, the 204A-LR ensures safe and easy access to stored items, keeping hardware solidly positioned when open. If that's not enough, the front latch disconnect…
…enhanced and super-strong 9300 series from Accuride, the 9322E is the specially crafted, pocket & bayonet, non-locking motion hardware that delivers guidance to the 9328E’s lock-in and lock-out capabilities. * Supports loads up to 600 lbs. * Tested drawer width up to 32” * For additional technical information see below Providing heavy-duty, full-extension assistance to industrial and vehicle hardware and equipment, this companion slide produces the same consistent movement as the 9328E due to…
A bracket kit for flush inset drawer fronts. Compatible with our 3135EC undermount solution, this kit includes one pair of bottom inset bracket assemblies in a zinc finish, adding ease and precision to alternative frames and mounting styles. For thorough installation, a rear face frame bracket (4180-0656-XE) is also required. Along with both brackets, this single kit also comes with two each #8-32 flat head screws, and an installation guide inside a polybag. Cabinet mounting screws are not…
…Equipped with full-extension and a hold-in detent the guarantees perfect function, the 3600 model your heavy-duty slide solution for bottom-mount freezer drawers, wide under-counter refrigerator drawers, industrial workstations, assembly lines, machinery, mechanical devices, and more. * Supports loads up to 273 lbs. * For drawers up to 16” wide * For additional technical information see below Available in a sleek clear zinc finish, the 3600 gives your hardware extra-strength and efficiency…
…loads up to 2,150 pounds. Thanks to specially reinforced steel construction, including an I-beam intermediate member, the C4170 is engineered to work continually under the most extreme stress and conditions. * Configuration: Side-Mount * Max Drawer Load: 2,150 lbs.* * Level of Travel: Full (100%) The Accuride C4170 Super Heavy-Duty Slide is an ideal movement solution for sliding applications in automation, robotics, and material handling. The C4170 is available in lengths from 20 to 40 inches…
-
Extra-strength meets versatility. Uniquely engineered for drawers and shelves up to 42" wide, our 7950 Heavy-Duty Full-Extension Slide can be side- or flat-mounted in hardware and fixtures for cookware, toolboxes, equipment storage, and so much more. * Side-mount load capacity up to 350 lbs. * Flat-mount load capacity up to 150 lbs. * For drawers up to 42” wide * For additional technical information see below Designed with a bridged ball retainer that keeps your sliding hardware in sync, the…
