Duty
- Products (131)
- Blogs (12)
- Videos (11)
- Newsroom (18)
- Resource Center (2)
-
The original undermount drawer slide. Eliminating side-space requirements while creating a seamless design, the 1029 model is a single slide, concealed solution perfect for residential cabinetry and furniture as well as small retail displays and storage. * Supports loads up to 35 lbs. * For drawers up to 16” wide * For additional technical information see below Offering ¾-extension and a convenient friction disconnect, this undermount motion hardware is a go-to choice for modern renovations and…
Go above-and-beyond with motion hardware. A uniquely developed tilt track system that specializes in (but is not limited to) over-the-shoulder storage, the AL4190 solution guarantees full-viewing and easy-access to stowed-away items in a variety of settings, including supply and equipment storage on vehicles, in warehouses, and inside garages. * Supports loads up to 140 lbs. * For drawers up to 40” wide * Aluminum track in lengths of 24" and 40" * For additional technical information see below *…
Stainless steel with safety to boot. With a wider cross-section than the SS2028, the SS0330 model still offers the same security and endurance fit with stainless steel ball bearings and lubricated with food-safe grease for cabinetry in a wide range of spaces--industrial, outdoor, commercial, and residential. * Supports loads up to 143 lbs. * Tested drawer width at 18” * For additional technical information see below A non-disconnect solution for added safety and assurance, the SS0330 also boasts…
Stainless steel + super-strength. Complete with corrosion-resistance and a heavy-duty load rating, the SS5321 is go-to motion hardware for outdoor fixtures, watercraft, as well as marine and industrial storage. * Supports loads up to 352 lbs. * Tested drawer width at 18” * For additional technical information see below With the added convenience of over-travel for full-access to stored items, the SS5321 also includes a hold-in detent to prevent drawer roll-out and bounce-back, providing reliable…
-
Extra-strength meets versatility. Uniquely engineered for drawers and shelves up to 42" wide, our 7950 Heavy-Duty Full-Extension Slide can be side- or flat-mounted in hardware and fixtures for cookware, toolboxes, equipment storage, and so much more. * Side-mount load capacity up to 350 lbs. * Flat-mount load capacity up to 150 lbs. * For drawers up to 42” wide * For additional technical information see below Designed with a bridged ball retainer that keeps your sliding hardware in sync, the…
Medium-duty while anything but average. Including a positive lock-out, front latch disconnect, and over-travel for easy, extended access to stored items, the 305A-LR model is superior motion hardware for just about any industrial fixture--even photographic equipment. * Supports loads up to 140 lbs. * Tested drawer width at 16” * For additional technical information see below With an optional electronic enclosure bracket kit available for EIA rack-mount chassis, the 305A-LR allows for recessed…
Stainless steel hardware with a narrow profile. With a corrosion-resistant coating, the SS2028 model is perfect for fixtures that need to withstand moisture or high levels of humidity--including but not limited to industrial machines, outdoor hardware, and commercial or residential kitchens. * Supports loads up to 100 lbs. * For drawers up to 18” wide * For additional technical information see below Non-disconnect for added safety, the SS2028 also includes a standard ¾-extension and a hold-in…
For silent drawers that run deep. Equipped with polymer bearings and premium progressive movement, the 4033 model provides ultra-quiet, ultra-smooth movement for drawers crafted in furniture and built-in casework. * Supports loads up to 100 lbs. * For drawers 18” wide * For additional technical information see below Perfect for storage in offices, retail spaces, homes, and workspaces, the 4033 is commercial-grade motion hardware that offers silenced operation, precise vertical adjustment, and…
Above and beyond, over and out. Offering over-travel and ultra-quiet progressive movement to boot, the 4035 model is your go-to motion hardware contender for wooden furniture and cabinet frames, including built-in storage casework. * Supports loads up to 100 lbs. * For drawers up to 18” wide * For additional technical information see below Designed with polymer ball bearings, the 4035 ensures silenced operation as well as ease in the form of a rail mount/disconnect. Our handy hold-in detent…
The CB3620-258TV is a heavy-duty drawer slide ideal for media centers. * Supports loads up to 225 lbs. * 14"-extension * For additional technical information see below The CB3620-258TV includes hold-in detent to prevent roll-out and bounce-back.
The Accuride LA1815 is a pre-assembled linear track system for light-duty applications. Installers simply mount the track in place onto the cabinet/outer member, then mount a sliding door, panel, or over onto the cassette. * Max Load Rating (Static): 18 lbs. * Max Load Rating (Dynamic): 7 lbs. As with all Accuride products, the LA1815 comes backed by a Limited Lifetime Warranty.
Medium-duty load bearing for your metal fixtures. Engineered with pocket and bayonet mounting for a quick, tool-less installation, the 3320 model adds full-extension, linear motion to wider drawers and trays in supply cabinets, workbenches, and other industrial applications. * Supports loads up to 120 lbs. * Tested drawer width at 24” * For additional technical information see below Non-disconnect to ensure safety in workspaces and stations, the 3320 also includes silenced operation and a…
