Flat
- Products (30)
- Videos (4)
Compatible with the CBLIFT-0019 Ascent, these additional weight packs provide counterbalancing weight to ensure proper movement for your concealed flat screen motion hardware. Each kit comes with 10 additional 3.88 oz. weights.
Return to 116RC Product Detail Page Extra protection + Quality assurance. Engineered specifically for the 116RC model, this recycling bracket protects the carriages on your linear track system when a damper (CB0116-DAMP) is installed to cushion a fixture's end of travel. One recycling bracket is needed for each recirculating ball carriage.
-
Recently enhanced with increased load capacity and shock-absorbing ball bearing space bumpers that reduce impact noise, the 9301E model is the gentle giant of movement solutions--ready to boost heavy pull-out pantries, service vehicles, and even ATMs. * Supports loads up to 600 lbs. * For drawers up to 42” wide with slide lengths up to 60" * 9301E accessory bracket kits offer bottom and side mount installation options * For additional technical information see below Tested for a total of 50,000…
Inset installation made simpler! Engineered for use with our 3135EC Eclipse Undermount solution, this bracket kit assists with implementing a flush inset drawer front in need of concealed hardware. Complete with 2 RoHS-compliant inset assemblies with a zinc finish, two #8 32 flat head screws, and an installation guide--all inside a polybag--this kit is also available for bulk orders, fulfilling projects of any scale.
Compatible with our 1332 solution and accommodating pocket doors ¾” to 13/16” thick, this hinge kit provides the extra tools you need for an inset installation. Each order includes two 35mm salice black clip-on hinges, two 3mm mounting base plates, two 3mm hinge base spacers, two hinge arm cover caps, four #6 x ⅝” Phillips flat head screws, and one “Caution” door sticker.
Compatible with models 1332 and 1432, this carrier strip kit is sold separately from D-Pack hardware kits and optimizes pocket and flipper door installation. Each kit includes two black hinge carrier strips, 3 stainless steel connector clips, six #8 x ⅜” black pan head screws (without hinge base plate), six #8 x ⅝” zinc flat head screws (with hinge base plate), and one “Caution” sticker.
Compatible with models 1332 and 1432, this carrier strip kit is sold separately from D-Pack hardware kits and optimizes pocket and flipper door installation. Each kit includes two zinc hinge carrier strips, 3 stainless steel connector clips, six #8 x ⅜” black pan head screws (without hinge base plate), six #8 x ⅝” zinc flat head screws (with hinge base plate), and one “Caution” sticker.
Compatible with our 1432 solution and accommodating pocket doors 15/16” to 1 + ¼” thick, this hinge kit provides the extra tools you need for an inset installation. Each order includes two 40mm salice zinc clip-on hinges, two 3mm mounting base plates, two 3mm hinge base spacers, two silver hinge arm cover caps, four #6 x ⅝” zinc flat head screws, and one “Caution” door sticker.
Need extra connector clips for your pocket and flipper doors? We've got you covered. Working with vertically-mounted models, such as the 1332 and 1432, this kit includes an extra connector clip and installation screws for steadfast durability and convenience. Each kit includes one stainless steel connector clip, two #8 x ⅜” black electroplate pan-head screws (without hinge base plate), two #8 x ⅝” zinc flat head screws (with hinge base plate), as well as one ‘Caution’ sticker.
…with our 3135EC undermount solution, this kit includes one pair of bottom inset bracket assemblies in a zinc finish, adding ease and precision to alternative frames and mounting styles. For thorough installation, a rear face frame bracket (4180-0656-XE) is also required. Along with both brackets, this single kit also comes with two each #8-32 flat head screws, and an installation guide inside a polybag. Cabinet mounting screws are not included in this kit and must be purchased separately.
…movement, the 2601 model is light-duty industrial hardware perfect for tool boxes, laboratory equipment, and commercial-grade fixtures. * Supports loads up to 75 lbs. * Tested drawer width at 16” * For additional technical information see below Because of its extra low profile, the 2601 is not available for flat mounting. However, this motion hardware includes an even 0.50” of side-space along with a hold-in detent that forestalls drawer roll-out and bounce-back for a perfect close every time.
Return to 116RC Product Detail Page Extra Quiet + Renowned Quality. Sold as a single, extra component or within the 116RC kit, this cassette provides flawless, linear motion to aluminum track systems with the use of polymer bearings that guarantee silenced operation. Easy-to-install and available for flat- or side-mounting, this polymer ball bearing carriage adds smooth and reliable motion to your hardware of choice.
