Full
- Products (63)
- Blogs (2)
- Videos (25)
- Newsroom (8)
-
Heavy-duty made easy. Ranging from large pantry pull-outs or trays, drawers, and shelves throughout homes and workspaces to steadfast equipment storage on utility, service, and recreational vehicles, the 9307E does all the heavy lifting to keep your stored items safe and easy-to-access. * Supports loads up to 600 lbs. * Non-disconnect * For additional technical information see below Equipped with a front latch release that secures drawers and trays in an open position for extended access, the…
The companion slide to the 9328E model. A member of the newly enhanced and super-strong 9300 series from Accuride, the 9322E is the specially crafted, pocket & bayonet, non-locking motion hardware that delivers guidance to the 9328E’s lock-in and lock-out capabilities. * Supports loads up to 600 lbs. * Tested drawer width up to 32” * For additional technical information see below Providing heavy-duty, full-extension assistance to industrial and vehicle hardware and equipment, this companion…
With an automatic reset stroke of 1.75", the 3832EC model brings drawers to a controlled and satisfying close every single time. Add a bit of much-needed ease to hardware in the home, industrial workspaces, or institutional equipment. * Supports loads up to 100 lbs. * For drawers up to 16” wide * For additional technical information see below Engineered with the end-user in mind, the 3832EC’s Easy-Close mechanism remains partially shielded to prevent small debris particles from interfering with…
-
The Accuride AL4165 is an industrial-grade and heavy-duty slide with two-way full travel. The AL4165 uses corrosion-resistant aluminum slide members and stainless-steel bearings, ensuring excellent long-term performance even in tough environments. * Supports loads up to 596 lbs. * Side-mount configuration * Two-way Travel * Corrosion-resistant materials * Full-extension design The AL4165 offers full-extension travel in both directions, while occupying only 1.04 inches of side-space. This slide…
The Accuride 0363 Two-Way Drawer Slide is a light-duty and full extension solution for dual-access applications. This slide comes with the added benefit of a robust hold-in detent to help keep drawers and trays secured. * Supports loads up to 100 lbs. * Full-extension travel (both directions) * Sold in singles (rather than pairs) * Tested for 80,000 cycles * Backed by a Limited Lifetime Warranty The Accuride 0363 is an ideal solution for kitchen islands, supply carts, and drive-thru pharmacies.…
High-performance with a very low profile. Offering full access to stored items with full-extension movement, the 2601 model is light-duty industrial hardware perfect for tool boxes, laboratory equipment, and commercial-grade fixtures. * Supports loads up to 75 lbs. * Tested drawer width at 16” * For additional technical information see below Because of its extra low profile, the 2601 is not available for flat mounting. However, this motion hardware includes an even 0.50” of side-space along with…
The Accuride ST8210 is the smart option for movement in commercial kitchen appliances. The NSF-certified roller-bearing slide is easy to install and needs little maintenance. Over two inches of extra travel gives you full reach of items in the back of a drawer or tray. The extra room makes searching, sorting, and retrieving items easier, saving time (and money). The ST8210 also has a self-close and auto lock-in design to ensure drawers close properly. * Side-mount * For loads up to 230 lbs *…
The Accuride ST8211 is the smart option for movement in commercial kitchen appliances. The NSF-certified roller-bearing slide is easy to install and needs little maintenance. Over two inches of extra travel gives you full reach of items in the back of a drawer or tray. The extra room makes searching, sorting, and retrieving items easier, saving time (and money). The ST8211 also has a self-close and auto lock-in design to ensure drawers close properly. * Bottom-mount * For loads up to 230 lbs *…
…specially reinforced steel construction, including an I-beam intermediate member, the C4170 is engineered to work continually under the most extreme stress and conditions. * Configuration: Side-Mount * Max Drawer Load: 2,150 lbs.* * Level of Travel: Full (100%) The Accuride C4170 Super Heavy-Duty Slide is an ideal movement solution for sliding applications in automation, robotics, and material handling. The C4170 is available in lengths from 20 to 40 inches and comes with an Accuride Limited…
…spaces, and industrial locations. * Side-mount load capacity up to 350 lbs. * Flat-mount load capacity up to 150 lbs. * For drawers up to 42" wide * For additional technical information see below With versatile mounting options and a handed lever disconnect for easy disassembly and reinsertion, this heavy-duty solution lends itself to a full range of uses that require unfailing movement and extra-strength. Model 7957 is also BHMA & AWI certified for third-party validation and quality assurance.
Resilience and high-performance with an extra side of ease. Our 3634EC model offers a coveted Easy-Close action for wider drawers, trays, and storage bins in a full range of settings and projects. * Supports loads up to 150 lbs. * For drawers up to 42" wide * Recommended drawer box size 1 + 9/16" less than the cabinet opening. * For additional technical information see below Not only does this over-travel solution promise a smooth and gentle close after every use, but this slide also contains…
Over the moon for over-travel? So are we. Our Model 3634 is designed to enhance wider drawers, shelves, and storage bins that require full access–from household kitchens to business or medical offices, and even retail stores. * Side-mount load capacity up to 200 lbs. per pair with drawer width of 42" * Flat mount load capacity up to 75 lbs. per pair with drawer width of 24" * Recommended drawer box size 1 + 9/16" less than the cabinet opening * For additional technical information see below With…
