Hinge Kit

  • Products (10)
VIEW AS:
Grid List

Items 1 - 10 of 10

  • 1
per page
  1. Compatible with our 1332 solution and accommodating pocket doors ¾” to 13/16” thick, this hinge kit provides the extra tools you need for an inset installation. Each order includes two 35mm salice black clip-on hinges, two 3mm mounting base plates, two 3mm hinge base spacers, two hinge arm cover caps, four #6 x ⅝” Phillips flat head screws, and one “Caution” door sticker.

  2. Lending a hand with overlay installation for your pocket and flipper door applications, this optional clip-on hinge kit is compatible with Accuride models 123 and 1234. Each kit includes two zinc 40mm overlay clip-on hinges, 2 base plates, four #6 screws, four #8 screws, and one “Caution” sticker.

  3. Compatible with our 1432 solution and accommodating pocket doors 15/16” to 1 + ¼” thick, this hinge kit provides the extra tools you need for an inset installation. Each order includes two 40mm salice zinc clip-on hinges, two 3mm mounting base plates, two 3mm hinge base spacers, two silver hinge arm cover caps, four #6 x ⅝” zinc flat head screws, and one “Caution” door sticker.

  4. 4180-0313-XE - Test Order Product 40mm Salice Clip-On Hinge Kit (Inset + Thick Doors)
    $100.00

    Lending a hand with inset installation for thicker pocket and flipper door applications, this optional clip-on hinge kit is compatible with Accuride models 123 and 1234. Each kit includes two zinc 40mm inset clip-on hinges, 2 base plates, four #6 screws, four #8 screws, and one “Caution” sticker.

  5. Compatible with models 1332 and 1432, this carrier strip kit is sold separately from D-Pack hardware kits and optimizes pocket and flipper door installation. Each kit includes two black hinge carrier strips, 3 stainless steel connector clips, six #8 x ⅜” black pan head screws (without hinge base plate), six #8 x ⅝” zinc flat head screws (with hinge base plate), and one “Caution” sticker.

  6. Compatible with models 1332 and 1432, this carrier strip kit is sold separately from D-Pack hardware kits and optimizes pocket and flipper door installation. Each kit includes two zinc hinge carrier strips, 3 stainless steel connector clips, six #8 x ⅜” black pan head screws (without hinge base plate), six #8 x ⅝” zinc flat head screws (with hinge base plate), and one “Caution” sticker.

  7. 4180-0391-XE 123 35mm Base Kit
    $43.73

    Compatible with our 123 Flipper Door Slide, this inset base kit includes black 35mm clip-on hinges as well as #6, #8, and M6 Euro screws--plus pivot blocks and one “Caution” sticker.

  8. 4180-0412-XE Connector Clip Kit
    $4.08

    Need extra connector clips for your pocket and flipper doors? We've got you covered. Working with vertically-mounted models, such as the 1332 and 1432, this kit includes an extra connector clip and installation screws for steadfast durability and convenience. Each kit includes one stainless steel connector clip, two #8 x ⅜” black electroplate pan-head screws (without hinge base plate), two #8 x ⅝” zinc flat head screws (with hinge base plate), as well as one ‘Caution’ sticker.

  9. Compatible with our 1332 solution and accommodating pocket doors ¾” to 13/16” thick, this hinge kit provides the extra tools you need for an inset installation. Each order includes two 35mm salice zinc clip-on hinges, two 3mm mounting base plates, two 3mm hinge base spacers, two hinge arm cover caps, four #6 x ⅝” Phillips flat head screws, and one “Caution” door sticker.

  10. …moon for overhead storage? So are we. Engineered to retract over the top of overhead storage compartments in commercial spaces or entertainment centers, the 1145 model is exclusively for horizontally mounted doors. * Supports loads up to 30 lbs. * Doors up to 36” wide * For additional technical information see below Providing minimum racking and your choice in steel or polymer bearings, the 1145 also comes with a pin hinge and lends itself to optional clip-on bracket kits for added versatility.

VIEW AS:
Grid List

Items 1 - 10 of 10

  • 1
per page