Lock-Out
- Products (24)
- Blogs (2)
- Videos (5)
-
You can’t beat fantastic first-class function. The 2907 is a small yet impactful movement solution that can be found on the Tera 100 Supercomputer, the most powerful system in Europe. With its handy lock-out feature, this slide guarantees security and stability during maintenance and service for electronic enclosures. * Supports loads up to 115 lbs. * Tested chassis width at 16” * Designed for 1U-3U chassis * For additional technical information see below Offering over-travel for full wiring and…
-
Bringing maximum versatility and utility to electronic enclosures, the 2907WB includes reversible mounting brackets and a slide-to-chassis hole pattern that allows for more options in positioning chassis and mounting configurations. * Supports loads up to 120 lbs. * Tested chassis width at 16” * Designed for 1U-3U chassis * For additional technical information see below With a unique thumb screw fastener, this slide adapts to round, square, or tapped holes on rails and provides tool-less pin…
…companion slide to the 9328E model. A member of the newly enhanced and super-strong 9300 series from Accuride, the 9322E is the specially crafted, pocket & bayonet, non-locking motion hardware that delivers guidance to the 9328E’s lock-in and lock-out capabilities. * Supports loads up to 600 lbs. * Tested drawer width up to 32” * For additional technical information see below Providing heavy-duty, full-extension assistance to industrial and vehicle hardware and equipment, this companion slide…
-
…and machinery, medical equipment, electronic enclosures, and more. * Supports loads up to 150 lbs. * Includes stop-out * For additional technical information see below Unlike the 3307, the 3357 includes a stop-out. However, this motion hardware’s stop-out does not include a lock-out that holds chassis in an open position. Equipped with a handy front latch disconnect and a hold-in detent that guarantees high-performance, the 3357 is workhorse hardware for high-production environments.
-
Always on the go with precious cargo in tow? We’ve got you covered with our enhanced 9308-E5. The 9308-E5 is a kit that includes one right-handed 9308E Heavy-Duty Lock-In & Lock-Out and one 9301E Heavy-Duty standard slide. * Supports loads up to 600 lbs. * Includes one 9308E (right-handed) and one 9301E slide * Platform bracket kit (OPTIONAL) allows for bottom and side mount applications. From heavy-duty fixtures and appliances around the home to drawers and trays for gear on utility and…
-
Because heavier-duty shouldn’t mean more difficult. Specially designed to handle heavier chassis from 4U to 8U, the 3507 model also includes 2” of substantial over-travel for additional ease of access and maintenance, along with a convenient lock-out to hold chassis open for extended periods. * Supports loads up to 200 lbs. * Tested chassis width at 16” * For additional technical information see below Including guide pins that provide stability and cable management that allows for direct…
Extended access when you need it the most. As part of the CBHAND Locking Handle Kit, the CBHAN4-5 accommodates rear-mounted units, adding a convenient lock-out feature to models 3640A, 7950, 7957, 9301, or other slides with cross-sections of .75” or more. Each CBHAN4-5 kit is equipped with two push buttons, two lock blocks, and one guide bracket to convert your mobile hardware quickly and efficiently.
When in doubt, lock-out. Crafted using lightweight and corrosion-resistant components, the CBHAND Heavy-Duty Handle Kit adds a lock-out feature to your motion hardware--especially handy for mobile applications like drawers and trays inside utility, emergency, and overland vehicles. * Accommodates drawers up to 60” wide * Cut-to-length stainless steel rods allow for varying drawer widths (ordered separately) * For additional technical information see below Compatible with Accuride models 3640A,…
Working with both CBHAND kits, one order includes two stainless steel rods that aid in lock-in and/or lock-out conversions for models 3640A, 7950, 7957, 9301, or other slides with cross-sections of .75” or more.
Working with both CBHAND kits, one order includes two stainless steel rods that aid in lock-in and/or lock-out conversions for models 3640A, 7950, 7957, 9301, or other slides with cross-sections of .75” or more.
-
…when it comes to the movement, maintenance, and upkeep of electronic enclosures. * Supports loads up to 75 lbs. * .22” side-space * For additional technical information see below Equipped with over-travel that ensures full access along with a lock-out feature that keeps chassis secure in an extended position, the 2507 also boasts smooth, sequenced motion you can consistently rely on. This is a custom designed OEM product available to high-volume clients. Longer lead times, tooling charges, and…
-
The 3306DO is a medium-duty and over-travel slide perfect for use in transportation, workstations, and kiosks. The 3306DO has a lock-in feature to keep drawers closed in transit, and detent-out to hold drawers open when needed. * Supports loads up to 150 lbs. * 1" over-travel * Lock-in feature * Hold-out detent The 3306DO comes tested at 10,000 cycles and includes a Limited Lifetime Warranty. For an alternative with lock-out, see the Accuride 3308.
