Locking Glides
- Products (36)
- Blogs (2)
- Videos (8)
- Newsroom (2)
The ST8200 is a bold new option in heavy-duty roller-bearing slides. This premium movement solution features a low-maintenance design built to handle the rigors of frequent use. The ST8200 provides you with hassle-free installation (welding not necessary) and added conveniences, including self-close and auto lock-in features. * Side-mount configuration. * Easy to install * Stainless-steel construction * Full-extension design (over-travel upon request) * Max Load rating: 125 lbs. * Available in…
The Accuride ST8210 is the smart option for movement in commercial kitchen appliances. The NSF-certified roller-bearing slide is easy to install and needs little maintenance. Over two inches of extra travel gives you full reach of items in the back of a drawer or tray. The extra room makes searching, sorting, and retrieving items easier, saving time (and money). The ST8210 also has a self-close and auto lock-in design to ensure drawers close properly. * Side-mount * For loads up to 230 lbs *…
The Accuride ST8211 is the smart option for movement in commercial kitchen appliances. The NSF-certified roller-bearing slide is easy to install and needs little maintenance. Over two inches of extra travel gives you full reach of items in the back of a drawer or tray. The extra room makes searching, sorting, and retrieving items easier, saving time (and money). The ST8211 also has a self-close and auto lock-in design to ensure drawers close properly. * Bottom-mount * For loads up to 230 lbs *…
Go above-and-beyond with motion hardware. A uniquely developed tilt track system that specializes in (but is not limited to) over-the-shoulder storage, the AL4190 solution guarantees full-viewing and easy-access to stowed-away items in a variety of settings, including supply and equipment storage on vehicles, in warehouses, and inside garages. * Supports loads up to 140 lbs. * For drawers up to 40” wide * Aluminum track in lengths of 24" and 40" * For additional technical information see below *…
Extended access when you need it the most. As part of the CBHAND Locking Handle Kit, the CBHAN4-5 accommodates rear-mounted units, adding a convenient lock-out feature to models 3640A, 7950, 7957, 9301, or other slides with cross-sections of .75” or more. Each CBHAN4-5 kit is equipped with two push buttons, two lock blocks, and one guide bracket to convert your mobile hardware quickly and efficiently.
-
Because heavier-duty shouldn’t mean more difficult. Specially designed to handle heavier chassis from 4U to 8U, the 3507 model also includes 2” of substantial over-travel for additional ease of access and maintenance, along with a convenient lock-out to hold chassis open for extended periods. * Supports loads up to 200 lbs. * Tested chassis width at 16” * For additional technical information see below Including guide pins that provide stability and cable management that allows for direct…
When in doubt, lock-out. Crafted using lightweight and corrosion-resistant components, the CBHAND Heavy-Duty Handle Kit adds a lock-out feature to your motion hardware--especially handy for mobile applications like drawers and trays inside utility, emergency, and overland vehicles. * Accommodates drawers up to 60” wide * Cut-to-length stainless steel rods allow for varying drawer widths (ordered separately) * For additional technical information see below Compatible with Accuride models 3640A,…
-
The 3306DO is a medium-duty and over-travel slide perfect for use in transportation, workstations, and kiosks. The 3306DO has a lock-in feature to keep drawers closed in transit, and detent-out to hold drawers open when needed. * Supports loads up to 150 lbs. * 1" over-travel * Lock-in feature * Hold-out detent The 3306DO comes tested at 10,000 cycles and includes a Limited Lifetime Warranty. For an alternative with lock-out, see the Accuride 3308.
-
…System. For the complete slide and interlock system, please see Model 3641X. * Supports loads up to 180 lbs. * For drawers up to 42” wide * For additional technical information see below The 3641 also includes an over-travel feature to help with hard-to-reach items. The 3641 is an ideal solution for heavy-duty filing cabinets in office and industrial space. This is also BHMA & AWI certified for third-party validation and quality assurance. Optional gang locking system available 4180-0345-XE. .
Working with both CBHAND kits, one order includes two stainless steel rods that aid in lock-in and/or lock-out conversions for models 3640A, 7950, 7957, 9301, or other slides with cross-sections of .75” or more.
Working with both CBHAND kits, one order includes two stainless steel rods that aid in lock-in and/or lock-out conversions for models 3640A, 7950, 7957, 9301, or other slides with cross-sections of .75” or more.
-
Fits tight spaces geared towards light-duty electronic enclosures. Supporting 1U-2U chassis, the 2507 supplies narrow side-space and tool-less installation, increasing ease and efficiency when it comes to the movement, maintenance, and upkeep of electronic enclosures. * Supports loads up to 75 lbs. * .22” side-space * For additional technical information see below Equipped with over-travel that ensures full access along with a lock-out feature that keeps chassis secure in an extended position,…
