Medium Duty Slides
- Products (22)
- Videos (2)
- Newsroom (2)
The Accuride 118RC Medium-Duty Linear Track System is your go-to movement solution for sliding entries up to 800 pounds. This system uses innovative and durable cassettes within an aluminum track to deliver effortless linear movement. The 118RC is also extra-versatile by design, allowing you to mount sideways, flatly, or underhung with no negative effect on performance. * Max Load: 800 lbs. * Available Length(s): 94.5 in. Choose from two cassette options: a version with stainless steel balls for…
The 118RC End Stop halts your sliding door or panel to prevent it from damaging surfaces outside the edge of a linear track. This End Stop is a necessary part of the broader Accuride 118RC Medium-Duty Linear Track System.
The 118RC Damper cushions that last 2 inches of your sliding door or panel’s movement when equipped with the Accuride 118RC Medium-Duty Linear Track System. This eliminates hard and loud impacts when your door hits the end of the track. The Damper works in tandem with the 118RC Recycling Bracket. Both are simple clip-on accessories: No screws needed!
The Self-Leveling Door Bracket lets you use the Accuride 118RC Medium-Duty Linear Track System with sliding doors. Like all innovations from Accuride, the bracket’s specialties don’t end there: A novel design keeps your door level for smooth and steady motion. You can even install this accessory in as few as three steps! (See the technical sheet under “Downloads” for more information.)
-
…Medium-Duty Slide. Like our popular 3832EC Easy-Close, the 3932EC uses a 1/2-inch cross-section. This shared cross-section lets you use the 3932EC alongside (or instead of) its light-duty counterpart for heavier or wider drawers. * Includes soft-close action * Handles load up to 150 lbs. * Supports drawer widths up to 36 in. * Made with High-Strength Low-Alloy steel The 3932EC is an ideal movement solution for home and office cabinetry, metal enclosures, and medical carts. This slide comes AWI-…
-
The Accuride 3932 is a new medium-duty counterpart to the popular light-duty 3832. Like our popular 3832E Classic, the 3932 uses a �-inch cross-section. This shared cross-section lets you use the 3932 alongside (or instead of) its light-duty counterpart for heavier or wider drawers. * Handles load up to 150 lbs. * Supports drawer widths up to 36 in. * Made with High-Strength Low-Alloy steel The 3932 is an ideal movement solution for home and office cabinetry, metal enclosures, and medical carts.…
-
Give your pantry a motion hardware makeover. Providing shelf or platform mounting for pull-out cases, spice racks, storage bins, and entertainment centers, the 301-2590 remains a medium-duty, versatile solution--giving you full-access to hard-to-reach items with its premium over-travel. * Supports loads up to 155 lbs. * For drawers up to 16” wide * For additional technical information, see below Including attached brackets that allow for mounting on the top or bottom surfaces of cases, the…
-
Medium-duty load bearing for your metal fixtures. Engineered with pocket and bayonet mounting for a quick, tool-less installation, the 3320 model adds full-extension, linear motion to wider drawers and trays in supply cabinets, workbenches, and other industrial applications. * Supports loads up to 120 lbs. * Tested drawer width at 24” * For additional technical information see below Non-disconnect to ensure safety in workspaces and stations, the 3320 also includes silenced operation and a…
-
Industrial performance with a positive end stop. A non-disconnect solution for added security in high-production and highly technical environments, the 3301 model also includes your choice of a hold-in detent to prevent drawer roll-out and bounce-back, as well as an additional kit for electronic enclosure chassis mounting. * Supports loads up to 150 lbs. * Tested drawer width at 16” * For additional technical information see below Built for over-travel, the 3301 supplies extended, easy-access to…
-
The 3306DO is a medium-duty and over-travel slide perfect for use in transportation, workstations, and kiosks. The 3306DO has a lock-in feature to keep drawers closed in transit, and detent-out to hold drawers open when needed. * Supports loads up to 150 lbs. * 1" over-travel * Lock-in feature * Hold-out detent The 3306DO comes tested at 10,000 cycles and includes a Limited Lifetime Warranty. For an alternative with lock-out, see the Accuride 3308.
