Medium
- Products (26)
- Videos (4)
- Newsroom (2)
Resilience and high-performance with an extra side of ease. Our 3634EC model offers a coveted Easy-Close action for wider drawers, trays, and storage bins in a full range of settings and projects. * Supports loads up to 150 lbs. * For drawers up to 42" wide * Recommended drawer box size 1 + 9/16" less than the cabinet opening. * For additional technical information see below Not only does this over-travel solution promise a smooth and gentle close after every use, but this slide also contains…
The 118RC End Stop halts your sliding door or panel to prevent it from damaging surfaces outside the edge of a linear track. This End Stop is a necessary part of the broader Accuride 118RC Medium-Duty Linear Track System.
The 118RC Recycling Bracket magnetically resets the Damper for doors and panels equipped with the Accuride 118RC Medium-Duty Linear Track System. The Recycling Bracket works in tandem with the Damper. Both are simple clip-on accessories: No screws needed!
The 118RC Damper cushions that last 2 inches of your sliding door or panel’s movement when equipped with the Accuride 118RC Medium-Duty Linear Track System. This eliminates hard and loud impacts when your door hits the end of the track. The Damper works in tandem with the 118RC Recycling Bracket. Both are simple clip-on accessories: No screws needed!
The Self-Leveling Door Bracket lets you use the Accuride 118RC Medium-Duty Linear Track System with sliding doors. Like all innovations from Accuride, the bracket’s specialties don’t end there: A novel design keeps your door level for smooth and steady motion. You can even install this accessory in as few as three steps! (See the technical sheet under “Downloads” for more information.)
The 94.5-inch Track is a key part of the Accuride 118RC Medium-Duty Linear Track System. Each aluminum track measures 94.5 inches (or 2.4 meters) that you can cut or combine with other 118RC tracks for any desired length. You can even drill holes for your unique mounting needs!
The 118RC Cassette is a key innovation within the broader Accuride 118RC Medium-Duty Linear Track System. This novel component uses recirculating balls to let doors, partitions, and panels move smoothly within an aluminum 118RC Track. This version comes with stainless steel balls that prioritize performance, making it ideal for use in industrial environments. (For a version that prioritizes silence, see our 118RC Cassette with Polymer Balls.
The 118RC Cassette is a key innovation within the broader Accuride 118RC Medium-Duty Linear Track System. This novel component uses recirculating balls to let doors, partitions, and panels move smoothly within an aluminum 118RC Track. This version comes with polymer balls that prioritize silence, making it ideal for use in homes, offices, and boutiques. (For a version that prioritizes performance, see our 118RC Cassette with Stainless Steel Balls.)
-
Industrial performance with a positive end stop. A non-disconnect solution for added security in high-production and highly technical environments, the 3301 model also includes your choice of a hold-in detent to prevent drawer roll-out and bounce-back, as well as an additional kit for electronic enclosure chassis mounting. * Supports loads up to 150 lbs. * Tested drawer width at 16” * For additional technical information see below Built for over-travel, the 3301 supplies extended, easy-access to…
-
The Accuride 3932EC is a soft-close version of the new 3932 Medium-Duty Slide. Like our popular 3832EC Easy-Close, the 3932EC uses a 1/2-inch cross-section. This shared cross-section lets you use the 3932EC alongside (or instead of) its light-duty counterpart for heavier or wider drawers. * Includes soft-close action * Handles load up to 150 lbs. * Supports drawer widths up to 36 in. * Made with High-Strength Low-Alloy steel The 3932EC is an ideal movement solution for home and office cabinetry,…
-
The Accuride 3932 is a new medium-duty counterpart to the popular light-duty 3832. Like our popular 3832E Classic, the 3932 uses a �-inch cross-section. This shared cross-section lets you use the 3932 alongside (or instead of) its light-duty counterpart for heavier or wider drawers. * Handles load up to 150 lbs. * Supports drawer widths up to 36 in. * Made with High-Strength Low-Alloy steel The 3932 is an ideal movement solution for home and office cabinetry, metal enclosures, and medical carts.…
-
Give your pantry a motion hardware makeover. Providing shelf or platform mounting for pull-out cases, spice racks, storage bins, and entertainment centers, the 301-2590 remains a medium-duty, versatile solution--giving you full-access to hard-to-reach items with its premium over-travel. * Supports loads up to 155 lbs. * For drawers up to 16” wide * For additional technical information, see below Including attached brackets that allow for mounting on the top or bottom surfaces of cases, the…
