Product
- Products (223)
- Blogs (27)
- Videos (29)
- Newsroom (16)
- Resource Center (9)
-
You can’t beat fantastic first-class function. The 2907 is a small yet impactful movement solution that can be found on the Tera 100 Supercomputer, the most powerful system in Europe. With its handy lock-out feature, this slide guarantees security and stability during maintenance and service for electronic enclosures. * Supports loads up to 115 lbs. * Tested chassis width at 16” * Designed for 1U-3U chassis * For additional technical information see below Offering over-travel for full wiring and…
-
Bringing maximum versatility and utility to electronic enclosures, the 2907WB includes reversible mounting brackets and a slide-to-chassis hole pattern that allows for more options in positioning chassis and mounting configurations. * Supports loads up to 120 lbs. * Tested chassis width at 16” * Designed for 1U-3U chassis * For additional technical information see below With a unique thumb screw fastener, this slide adapts to round, square, or tapped holes on rails and provides tool-less pin…
-
No need to suspend your disbelief for this motion hardware. Equipped with a lever-disconnect and variable height mounting brackets, the 2109 model is perfect for light-duty cabinetry, keyboard trays, and pencil drawers. * Supports loads up to 75 lbs. * For drawers up to 16” wide * For additional technical information see below Backed by BHMA and AWI certification, this savvy solution provides a cushion of suspension to your hardware, matched with the practicality of a hold-in and hold-out detent…
Lightweight aluminum + stainless steel ball bearings = super-strength. Resistant to moisture, humidity, and corrosion, our AL4120 model can tackle any heavy-duty task while enduring harsh, outdoor, or moist environments. * Supports loads up to 1,212 lbs. * Tested drawer width at 24” * For additional technical information see below From woodworking projects to equipment storage and industrial use, this robust solution offers the same smooth, high-performance without adding extra weight to your…
-
Just when you thought a movement solution couldn’t get any stronger. Offering full-extension, a little extra side-space, and an increased load capacity compared to to its AL4120 counterpart, the AL4140 model combines the same super-strength and corrosion-resistance to maximize your machinery, cabinet frames, and so much more. * Supports loads up to 1,323 lbs. * 1.5” side-space * For additional technical information see below From hardware in cellars to heavy-duty appliances, this tough-as-nails…
The Accuride 123 Pocket Door Slide is an easy-to-install movement solution for concealed cabinet doors. This slide uses a novel design for self-alignment, ensuring smooth movement. The Accuride 123 allows a door to retract within a cabinet, preserving a clean esthetic. * Supports loads up to 30 lbs. * For pocket doors up to 42” tall x 24” wide * Features self-aligning movement * Vertically or horizontally mounted * Available in black (CB) finish * Includes 35mm hinges * Backed by a…
The Accuride CB1234 Pocket Door Slide is an easy-to-install movement solution for concealed cabinet doors. The slide uses a novel design for self-alignment, ensuring smooth movement. The Accuride CB1234 allows a door to retract within a cabinet, preserving a clean esthetic. * Support loads up to 30 lbs. * For pocket doors up to 42” tall x 24” wide * Features self-aligning movement * Vertically or horizontally mounted * Available in black (CB) finish * Backed by a Limited Lifetime…
Compatible with models 1332 and 1432, this carrier strip kit is sold separately from D-Pack hardware kits and optimizes pocket and flipper door installation. Each kit includes two black hinge carrier strips, 3 stainless steel connector clips, six #8 x ⅜” black pan head screws (without hinge base plate), six #8 x ⅝” zinc flat head screws (with hinge base plate), and one “Caution” sticker.
Compatible with models 1332 and 1432, this carrier strip kit is sold separately from D-Pack hardware kits and optimizes pocket and flipper door installation. Each kit includes two zinc hinge carrier strips, 3 stainless steel connector clips, six #8 x ⅜” black pan head screws (without hinge base plate), six #8 x ⅝” zinc flat head screws (with hinge base plate), and one “Caution” sticker.
Compatible with our 1332 solution and accommodating pocket doors ¾” to 13/16” thick, this hinge kit provides the extra tools you need for an inset installation. Each order includes two 35mm salice black clip-on hinges, two 3mm mounting base plates, two 3mm hinge base spacers, two hinge arm cover caps, four #6 x ⅝” Phillips flat head screws, and one “Caution” door sticker.
Compatible with our 1432 solution and accommodating pocket doors 15/16” to 1 + ¼” thick, this hinge kit provides the extra tools you need for an inset installation. Each order includes two 40mm salice zinc clip-on hinges, two 3mm mounting base plates, two 3mm hinge base spacers, two silver hinge arm cover caps, four #6 x ⅝” zinc flat head screws, and one “Caution” door sticker.
Need extra connector clips for your pocket and flipper doors? We've got you covered. Working with vertically-mounted models, such as the 1332 and 1432, this kit includes an extra connector clip and installation screws for steadfast durability and convenience. Each kit includes one stainless steel connector clip, two #8 x ⅜” black electroplate pan-head screws (without hinge base plate), two #8 x ⅝” zinc flat head screws (with hinge base plate), as well as one ‘Caution’ sticker.
