Products
- Products (231)
- Blogs (28)
- Videos (28)
- Newsroom (16)
- Resource Center (10)
The Accuride 0363 Two-Way Drawer Slide is a light-duty and full extension solution for dual-access applications. This slide comes with the added benefit of a robust hold-in detent to help keep drawers and trays secured. * Supports loads up to 100 lbs. * Full-extension travel (both directions) * Sold in singles (rather than pairs) * Tested for 80,000 cycles * Backed by a Limited Lifetime Warranty The Accuride 0363 is an ideal solution for kitchen islands, supply carts, and drive-thru pharmacies.…
Stainless steel hardware with a narrow profile. With a corrosion-resistant coating, the SS2028 model is perfect for fixtures that need to withstand moisture or high levels of humidity--including but not limited to industrial machines, outdoor hardware, and commercial or residential kitchens. * Supports loads up to 100 lbs. * For drawers up to 18” wide * For additional technical information see below Non-disconnect for added safety, the SS2028 also includes a standard ¾-extension and a hold-in…
Stainless steel + super-strength. Complete with corrosion-resistance and a heavy-duty load rating, the SS5321 is go-to motion hardware for outdoor fixtures, watercraft, as well as marine and industrial storage. * Supports loads up to 352 lbs. * Tested drawer width at 18” * For additional technical information see below With the added convenience of over-travel for full-access to stored items, the SS5321 also includes a hold-in detent to prevent drawer roll-out and bounce-back, providing reliable…
-
Stainless steel hardware with an easy-going side. Specially engineered with corrosion-resistant stainless steel and easy-install, L-shaped brackets with locator pins for a seamless disconnect, the SS5322 is the ideal solution for fixtures in commercial kitchens and industrial or outdoor cabinetry exposed to the elements. * Supports loads up to 265 lbs. * For drawers up to 18” wide * For additional technical information see below Equipped with a handy hold-in detent that eliminates any chance of…
Medium-duty while anything but average. Including a positive lock-out, front latch disconnect, and over-travel for easy, extended access to stored items, the 305A-LR model is superior motion hardware for just about any industrial fixture--even photographic equipment. * Supports loads up to 140 lbs. * Tested drawer width at 16” * For additional technical information see below With an optional electronic enclosure bracket kit available for EIA rack-mount chassis, the 305A-LR allows for recessed…
Self-sufficient hardware for extra convenience and efficiency. From kitchens, bathrooms, and hobby rooms to industrial workspaces, pedestals, and carts, the 3832ESC is a movement solution that provides full-extension along with a handy self-closing feature that exemplifies ease and safety. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below This specialty, self-close slide requires a stronger pull-force to open drawers but completes the…
Made for tall and heavy pocket doors, the Accuride CB1332 slide provides smooth and silent movement for media centers, armoires, and concealed storage. The CB1332 also includes Accuride’s advanced cable system, which eliminates “racking” often found when opening or closing tall cabinet doors. * For loads up to 75 lbs. * For pocket doors up to 78” tall x 26” wide * Features advanced Anti-Rak stabilizer system * Features self-aligning movement * Vertically or…
The Accuride ST8211 is the smart option for movement in commercial kitchen appliances. The NSF-certified roller-bearing slide is easy to install and needs little maintenance. Over two inches of extra travel gives you full reach of items in the back of a drawer or tray. The extra room makes searching, sorting, and retrieving items easier, saving time (and money). The ST8211 also has a self-close and auto lock-in design to ensure drawers close properly. * Bottom-mount * For loads up to 230 lbs *…
The Accuride 118RC Medium-Duty Linear Track System is your go-to movement solution for sliding entries up to 800 pounds. This system uses innovative and durable cassettes within an aluminum track to deliver effortless linear movement. The 118RC is also extra-versatile by design, allowing you to mount sideways, flatly, or underhung with no negative effect on performance. * Max Load: 800 lbs. * Available Length(s): 94.5 in. Choose from two cassette options: a version with stainless steel balls for…
The 118RC Cassette is a key innovation within the broader Accuride 118RC Medium-Duty Linear Track System. This novel component uses recirculating balls to let doors, partitions, and panels move smoothly within an aluminum 118RC Track. This version comes with stainless steel balls that prioritize performance, making it ideal for use in industrial environments. (For a version that prioritizes silence, see our 118RC Cassette with Polymer Balls.
The 118RC Cassette is a key innovation within the broader Accuride 118RC Medium-Duty Linear Track System. This novel component uses recirculating balls to let doors, partitions, and panels move smoothly within an aluminum 118RC Track. This version comes with polymer balls that prioritize silence, making it ideal for use in homes, offices, and boutiques. (For a version that prioritizes performance, see our 118RC Cassette with Stainless Steel Balls.)
The 118RC End Stop halts your sliding door or panel to prevent it from damaging surfaces outside the edge of a linear track. This End Stop is a necessary part of the broader Accuride 118RC Medium-Duty Linear Track System.
