Sliding Door
- Products (28)
- Blogs (2)
- Videos (6)
- Newsroom (2)
The 115RC Brackets let installers mount sliding doors onto an Accuride 115RC Linear Track System. Installers simply mount the brackets onto 115RC cassettes with loads distributed evenly to eliminate unwanted torsional effects and ensure smooth movement. The brackets accommodate various door widths and come in three options for door thicknesses up to 40 mm (or 1.57").
The 115RC Brackets let installers mount sliding doors onto an Accuride 115RC Linear Track System. Installers simply mount the brackets onto 115RC cassettes with loads distributed evenly to eliminate unwanted torsional effects and ensure smooth movement. The brackets accommodate various door widths and come in three options for door thicknesses up to 40 mm (or 1.57").
The 115RC Brackets let installers mount sliding doors onto an Accuride 115RC Linear Track System. Installers simply mount the brackets onto 115RC cassettes with loads distributed evenly to eliminate unwanted torsional effects and ensure smooth movement. The brackets accommodate various door widths and come in three options for door thicknesses up to 40 mm (or 1.57").
Return to 116RC Product Detail Page Finishing touches for sliding door hardware. Engineered for the 116RC Door Hardware Kit, these fascia end caps stabilize the anodized aluminum fascia board on its support beam, specifically for use with track systems on sliding doors. Each order comes with two fascia end caps and eight screws for a thorough installation and robust solution.
The 118RC End Stop halts your sliding door or panel to prevent it from damaging surfaces outside the edge of a linear track. This End Stop is a necessary part of the broader Accuride 118RC Medium-Duty Linear Track System.
The 118RC Damper cushions that last 2 inches of your sliding door or panel’s movement when equipped with the Accuride 118RC Medium-Duty Linear Track System. This eliminates hard and loud impacts when your door hits the end of the track. The Damper works in tandem with the 118RC Recycling Bracket. Both are simple clip-on accessories: No screws needed!
Return to 116RC Product Detail Page Structural support for load-bearing walls. A component within the Sliding Door Hardware Kit for the 116RC Heavy-Duty Linear Track System, this support beam anchors your motion hardware securely for tried and true performance that endures the test of time.
The Accuride LA1815 is a pre-assembled linear track system for light-duty applications. Installers simply mount the track in place onto the cabinet/outer member, then mount a sliding door, panel, or over onto the cassette. * Max Load Rating (Static): 18 lbs. * Max Load Rating (Dynamic): 7 lbs. As with all Accuride products, the LA1815 comes backed by a Limited Lifetime Warranty.
Return to 116RC Product Detail Page The sum of its parts. A component within the Sliding Door Hardware Kit for the 116RC Heavy-Duty Linear Track System, this 142” fascia is crafted from anodized aluminum and clips onto its support beam (AL0116-SUPPRC) for a sleek, completed design. For extra easy-access, an installer can lift and hook the fascia open to reach the track and fittings responsible for linear motion.
A state-of-the-art sliding solution. With ADA-compliant linear motion and design, the 116RC model is an innovative breakthrough for the sliding door market, also accommodating large screens, panels, movable walls, barn doors, and so much more. * Supports loads up to 793 lbs. * Aluminum track in a choice of two lengths: 94.5" and 142" Purchase of the 116RC requires the following components Carriage (Min. Quantity: 1) * SS0116-CASSRC: Carriage – Stainless Steel Balls * CB0116-CASSRC: Carriage –…
…for our 116RC Heavy-Duty Linear Track System, this damper cushions and decelerates the last 1.6” of your hardware’s travel for reduced vibration and migration while also providing a smooth, gentle return every time. With the use of this optional damper, end stops are no longer required. However, recycling brackets (SS0166-BRKT01RC) will be needed to protect the carriages, and sliding door fixtures will require a separate bracket kit. Your hardware deserves every bit of convenience and ease.
Compatible with our 123 Flipper Door Slide, this inset base kit includes black 35mm clip-on hinges as well as #6, #8, and M6 Euro screws--plus pivot blocks and one “Caution” sticker.