Test Suggestion 1
- Products (117)
- Blogs (14)
- Videos (20)
- Newsroom (14)
- Resource Center (4)
- Home
- >
- Customer Favorites
- >
- Test Suggestion 1
- >
- 60"
- >
- 15mm
-
…vehicles, and even ATMs. * Supports loads up to 600 lbs. * For drawers up to 42” wide with slide lengths up to 60" * 9301E accessory bracket kits offer bottom and side mount installation options * For additional technical information see below Tested for a total of 50,000 cycles at maximum load capacity, the 9301E solution extends unfailing strength and reliability for a full breadth of heavy-duty storage needs, setting a high bar in quality and durability for competing slides in its weight…
…newly enhanced and super-strong 9300 series from Accuride, the 9322E is the specially crafted, pocket & bayonet, non-locking motion hardware that delivers guidance to the 9328E’s lock-in and lock-out capabilities. * Supports loads up to 600 lbs. * Tested drawer width up to 32” * For additional technical information see below Providing heavy-duty, full-extension assistance to industrial and vehicle hardware and equipment, this companion slide produces the same consistent movement as the 9328E due…
…and fixtures, the 9328E enables tool-less installation that’s labor-saving and cost-effective for equipment drawers or trays in various large vehicles intended for emergency, utility, hazmat, or recreational use. * Supports loads up to 360 lbs. * Tested drawer width up to 32” * For additional technical information see below Fit with an enhanced lock-in and lock-out designed for added reliability, the 9328E also contains a front-latch release that locks hardware in open or closed positions. Along…
…up to 265 lbs. * Aluminum tracks available in two lengths: 47" and 94,” with or without pre-drilled holes Purchase of the 115RC requires the following components: Carriage (Min. Quantity: 1) * SS0115-CASSRC: Carriage – Stainless Steel Balls * CB0115-CASSRC: Carriage – Polymer Balls Track (Min. Quantity: 1) * AL0115-0120RCH: 47" Aluminum Track w/ Pre-Drilled holes * AL0115-0240RCH: 94" Aluminum Track w/ Pre-Drilled holes * AL0115-0120RC: 47" Aluminum Track w/o Pre-Drilled holes * AL0115-0240RC:…
The 115RC Brackets let installers mount sliding doors onto an Accuride 115RC Linear Track System. Installers simply mount the brackets onto 115RC cassettes with loads distributed evenly to eliminate unwanted torsional effects and ensure smooth movement. The brackets accommodate various door widths and come in three options for door thicknesses up to 40 mm (or 1.57").
The 115RC Brackets let installers mount sliding doors onto an Accuride 115RC Linear Track System. Installers simply mount the brackets onto 115RC cassettes with loads distributed evenly to eliminate unwanted torsional effects and ensure smooth movement. The brackets accommodate various door widths and come in three options for door thicknesses up to 40 mm (or 1.57").
-
Always on the go with precious cargo in tow? We’ve got you covered with our enhanced 9308-E5. The 9308-E5 is a kit that includes one right-handed 9308E Heavy-Duty Lock-In & Lock-Out and one 9301E Heavy-Duty standard slide. * Supports loads up to 600 lbs. * Includes one 9308E (right-handed) and one 9301E slide * Platform bracket kit (OPTIONAL) allows for bottom and side mount applications. From heavy-duty fixtures and appliances around the home to drawers and trays for gear on utility and…
