Test Suggestion 2

VIEW AS:
Grid List

Items 49 - 60 of 114

per page
  1. With an automatic reset stroke of 1.75", the 3832EC model brings drawers to a controlled and satisfying close every single time. Add a bit of much-needed ease to hardware in the home, industrial workspaces, or institutional equipment. * Supports loads up to 100 lbs. * For drawers up to 16” wide * For additional technical information see below Engineered with the end-user in mind, the 3832EC’s Easy-Close mechanism remains partially shielded to prevent small debris particles from interfering with…

  2. Pilaster kit for use on 3832 and 2132 slides.

  3. 4180-0322-XE 3832E Face Frame kit
    $10.03

    A face frame kit for use on the 3832E.

  4. A pair of rear brackets for adapting the 3800 series of slides into fame frame cabinetry. Compatible models include: * 3832E * 3832EDO * 3832ESC * 3832EHDSC * 3834E * 3834ESC

  5. Bracket kit for 2019

  6. Bracket kit for 2019

  7. Our Accuride Original slide packed with a little more common sense. The 3832EDO is specially crafted with longer spacers and additional bearings, while also designed with a hold-out detent to keep pull-out surfaces and drawers solidly positioned. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below Backed by AWI & BHMA certification, this motion hardware is a beautiful addition to kitchens, workspaces, and retail stores. With easy access…

  8. With an automatic reset stroke of 1.75", the 3832EC model brings drawers to a controlled and satisfying close every single time. Add a bit of much-needed ease to hardware in the home, industrial workspaces, or institutional equipment. * Supports loads up to 100 lbs. * For drawers up to 16” wide * For additional technical information see below Engineered with the end-user in mind, the 3832EC’s Easy-Close mechanism remains partially shielded to prevent small debris particles from interfering with…

  9. Return to FG115 Product Detail Page Lightweight + Low-maintenance. One meter longer than its counterpart (FG115-0100T), this rail is made from the same hard anodized aluminum that serves as the basis for the FG115 Linear Motion Guide's fluid movement and tough outer coating that requires minimal upkeep. Self-lubricated for seamless motion, FG115 rails can be cut to a determined length or butted together for an extended span of travel. For optimal performance and longevity, utilize all fixing…

  10. Go with the Accuride Original line of motion hardware. Complete with enhanced strength and movement, full-extension, and a lever-disconnect, the 3832E model is a classic drawer slide that fits a wide range of uses including but not limited to: pull-out shelves, kitchen utensil drawers, and point-of-sales trays. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below A patented Cam Drawer Adjust allows for precise vertical adjustment, while a…

  11. The original undermount drawer slide. Eliminating side-space requirements while creating a seamless design, the 1029 model is a single slide, concealed solution perfect for residential cabinetry and furniture as well as small retail displays and storage. * Supports loads up to 35 lbs. * For drawers up to 16” wide * For additional technical information see below Offering ¾-extension and a convenient friction disconnect, this undermount motion hardware is a go-to choice for modern renovations and…

  12. Return to 115RC Product Detail Page Corrosion-resistance + linear motion you can count on. Sold separately yet compatible with both 115RC kits (4180-0756-XE/4180-0746-XE), this 94” aluminum track acts as the solid foundation for a lightweight, reliable movement solution. For further customization, aluminum tracks may be cut to a desired length or butted together to extend length of travel. Note: these aluminum tracks do not come with pre-drilled holes.

VIEW AS:
Grid List

Items 49 - 60 of 114

per page