Test Suggestion 3
- Products (72)
- Blogs (9)
- Videos (13)
- Newsroom (3)
- Resource Center (3)
- Home
- >
- Customer Favorites
- >
- Test Suggestion 3
- >
- 16"
- >
- 14"
- >
- Side Mount
- >
- Bottom-mount
- >
- 101 - 200 lbs
-
…disconnect, the 204A-LR model also includes our handy lock-out feature, making it go-to motion hardware for mobile fixtures, medical carts, pharmaceutical trays, and high-production, industrial equipment or storage. * Supports loads up to 140 lbs. * Tested drawer width at 16” * For additional technical information see below Because of its lock-out capability, the 204A-LR ensures safe and easy access to stored items, keeping hardware solidly positioned when open. If that's not enough, the front…
-
…found on the Tera 100 Supercomputer, the most powerful system in Europe. With its handy lock-out feature, this slide guarantees security and stability during maintenance and service for electronic enclosures. * Supports loads up to 115 lbs. * Tested chassis width at 16” * Designed for 1U-3U chassis * For additional technical information see below Offering over-travel for full wiring and connection access as well as adjustable mounting brackets to accommodate a wide array of depths, rail…
…still offers the same security and endurance fit with stainless steel ball bearings and lubricated with food-safe grease for cabinetry in a wide range of spaces--industrial, outdoor, commercial, and residential. * Supports loads up to 143 lbs. * Tested drawer width at 18” * For additional technical information see below A non-disconnect solution for added safety and assurance, the SS0330 also boasts the same corrosion-resistant coating, making it the perfect motion hardware for fixtures subject…
-
…overachiever with a low profile. Handling heavy-duty, industrial loads, the 301 model also includes over-travel for complete, easy-to-reach access along with an optional bracket kit for electronic enclosure mounting. * Supports loads up to 175 lbs. * Tested drawer width at 16” * For additional technical information see below Non-disconnect motion hardware for added safety in professional workspaces, the 301 is an adept solution for medical equipment, EIA rack-mounted chassis, data processing,…
-
The 3306DO is a medium-duty and over-travel slide perfect for use in transportation, workstations, and kiosks. The 3306DO has a lock-in feature to keep drawers closed in transit, and detent-out to hold drawers open when needed. * Supports loads up to 150 lbs. * 1" over-travel * Lock-in feature * Hold-out detent The 3306DO comes tested at 10,000 cycles and includes a Limited Lifetime Warranty. For an alternative with lock-out, see the Accuride 3308.
…optional kit for electronic enclosure mounting while also enhancing a versatile array of fixtures, including but not limited to: toolboxes, mechanical devices, point-of-purchase displays, and medical equipment. * Supports loads up to 108 lbs. * Tested drawer width at 16” * For additional technical information see below Equipped with steel ball bearings and non-disconnect for an added element of safety, the 201 comes with Accuride’s trademark clear zinc finish for long-lasting, high-performance…
…lock-out, front latch disconnect, and over-travel for easy, extended access to stored items, the 305A-LR model is superior motion hardware for just about any industrial fixture--even photographic equipment. * Supports loads up to 140 lbs. * Tested drawer width at 16” * For additional technical information see below With an optional electronic enclosure bracket kit available for EIA rack-mount chassis, the 305A-LR allows for recessed mounting behind cabinet rails, reducing side-space requirements…
…and highly technical environments, the 3301 model also includes your choice of a hold-in detent to prevent drawer roll-out and bounce-back, as well as an additional kit for electronic enclosure chassis mounting. * Supports loads up to 150 lbs. * Tested drawer width at 16” * For additional technical information see below Built for over-travel, the 3301 supplies extended, easy-access to stored items in a wide variety of uses and environments, including but not limited to: power supply storage,…
-
…handy lock-out feature that holds drawers, trays, and chassis solidly positioned when open for extended, easy-access, the 3307 model enhances a bevy of industrial, electronic, and medical fixtures or equipment. * Supports loads up to 150 lbs. * Tested drawer width at 16” * For additional technical information see below This motion hardware's over-travel ability consistently ensures that items, cables, and other storage remain easy-to-reach, while an optional bracket kit makes the 3307 a viable…
-
…and keeping hardware solidly positioned when open or closed, the 3308 model ensures safety and easy-access for electronic enclosures, cash drawers, industrial workstations, medical emergency carts, and even vending machines. * Supports loads up to 150 lbs. * Tested drawer width at 16” * For additional technical information see below Equipped with over-travel and our easy-to-use lever disconnect, the 3308 brings simplicity and endurance to any hardware or space in need of unfailing linear motion.
…with pocket and bayonet mounting for a quick, tool-less installation, the 3320 model adds full-extension, linear motion to wider drawers and trays in supply cabinets, workbenches, and other industrial applications. * Supports loads up to 120 lbs. * Tested drawer width at 24” * For additional technical information see below Non-disconnect to ensure safety in workspaces and stations, the 3320 also includes silenced operation and a hold-in detent, promising seamless, unerring movement in demanding,…
-
…heavier chassis from 4U to 8U, the 3507 model also includes 2” of substantial over-travel for additional ease of access and maintenance, along with a convenient lock-out to hold chassis open for extended periods. * Supports loads up to 200 lbs. * Tested chassis width at 16” * For additional technical information see below Including guide pins that provide stability and cable management that allows for direct attachment to motion hardware, the 3507 is also engineered with our One Motion Insertion…