Test Suggestion 5
- Products (70)
- Blogs (16)
- Videos (12)
- Newsroom (3)
- Resource Center (2)
Stainless steel + super-strength. Complete with corrosion-resistance and a heavy-duty load rating, the SS5321 is go-to motion hardware for outdoor fixtures, watercraft, as well as marine and industrial storage. * Supports loads up to 352 lbs. * Tested drawer width at 18” * For additional technical information see below With the added convenience of over-travel for full-access to stored items, the SS5321 also includes a hold-in detent to prevent drawer roll-out and bounce-back, providing reliable…
-
…overachiever with a low profile. Handling heavy-duty, industrial loads, the 301 model also includes over-travel for complete, easy-to-reach access along with an optional bracket kit for electronic enclosure mounting. * Supports loads up to 175 lbs. * Tested drawer width at 16” * For additional technical information see below Non-disconnect motion hardware for added safety in professional workspaces, the 301 is an adept solution for medical equipment, EIA rack-mounted chassis, data processing,…
-
The 3306DO is a medium-duty and over-travel slide perfect for use in transportation, workstations, and kiosks. The 3306DO has a lock-in feature to keep drawers closed in transit, and detent-out to hold drawers open when needed. * Supports loads up to 150 lbs. * 1" over-travel * Lock-in feature * Hold-out detent The 3306DO comes tested at 10,000 cycles and includes a Limited Lifetime Warranty. For an alternative with lock-out, see the Accuride 3308.
-
…versatility and utility to electronic enclosures, the 2907WB includes reversible mounting brackets and a slide-to-chassis hole pattern that allows for more options in positioning chassis and mounting configurations. * Supports loads up to 120 lbs. * Tested chassis width at 16” * Designed for 1U-3U chassis * For additional technical information see below With a unique thumb screw fastener, this slide adapts to round, square, or tapped holes on rails and provides tool-less pin mounting of chassis…
…solution for dual-access applications. This slide comes with the added benefit of a robust hold-in detent to help keep drawers and trays secured. * Supports loads up to 100 lbs. * Full-extension travel (both directions) * Sold in singles (rather than pairs) * Tested for 80,000 cycles * Backed by a Limited Lifetime Warranty The Accuride 0363 is an ideal solution for kitchen islands, supply carts, and drive-thru pharmacies. For more information, download the Accuride 0363 technical sheet below.
-
…profile. Specially developed for 1U to 2U chassis, the 2807 model offers a flock of handy features including over-travel, narrow side space, and enhanced friction movement for superior efficiency and performance. * Supports loads up to 100 lbs. * Tested chassis width at 16” * For additional technical information see below This electronic enclosure motion hardware comes with a fixed front bracket and adjustable rear bracket for added versatility and precision, while a premium lock-out feature…
…newly enhanced and super-strong 9300 series from Accuride, the 9322E is the specially crafted, pocket & bayonet, non-locking motion hardware that delivers guidance to the 9328E’s lock-in and lock-out capabilities. * Supports loads up to 600 lbs. * Tested drawer width up to 32” * For additional technical information see below Providing heavy-duty, full-extension assistance to industrial and vehicle hardware and equipment, this companion slide produces the same consistent movement as the 9328E due…
…and fixtures, the 9328E enables tool-less installation that’s labor-saving and cost-effective for equipment drawers or trays in various large vehicles intended for emergency, utility, hazmat, or recreational use. * Supports loads up to 360 lbs. * Tested drawer width up to 32” * For additional technical information see below Fit with an enhanced lock-in and lock-out designed for added reliability, the 9328E also contains a front-latch release that locks hardware in open or closed positions. Along…
…still offers the same security and endurance fit with stainless steel ball bearings and lubricated with food-safe grease for cabinetry in a wide range of spaces--industrial, outdoor, commercial, and residential. * Supports loads up to 143 lbs. * Tested drawer width at 18” * For additional technical information see below A non-disconnect solution for added safety and assurance, the SS0330 also boasts the same corrosion-resistant coating, making it the perfect motion hardware for fixtures subject…
…optional kit for electronic enclosure mounting while also enhancing a versatile array of fixtures, including but not limited to: toolboxes, mechanical devices, point-of-purchase displays, and medical equipment. * Supports loads up to 108 lbs. * Tested drawer width at 16” * For additional technical information see below Equipped with steel ball bearings and non-disconnect for an added element of safety, the 201 comes with Accuride’s trademark clear zinc finish for long-lasting, high-performance…
-
…disconnect, the 204A-LR model also includes our handy lock-out feature, making it go-to motion hardware for mobile fixtures, medical carts, pharmaceutical trays, and high-production, industrial equipment or storage. * Supports loads up to 140 lbs. * Tested drawer width at 16” * For additional technical information see below Because of its lock-out capability, the 204A-LR ensures safe and easy access to stored items, keeping hardware solidly positioned when open. If that's not enough, the front…
-
…mount, providing tool-less installation that saves time and energy, the 2120 model is a light-duty champion for small metal pods, office supply storage, and other fixtures in need of standard, ¾-extension access. * Supports loads up to 75 lbs. * Tested drawer width at 16” * For additional technical information see below Equipped with a lever disconnect that simplifies disassembly and reinsertion, the 2120 also boasts a hold-in detent, eliminating drawer failure and bounce-back while ensuring…
