Test Suggestion 5
- Products (70)
- Blogs (16)
- Videos (12)
- Newsroom (3)
- Resource Center (2)
Come extra-prepared with tools for your undermount solution. Compatible with our 3135EC model, the Eclipse Tool Kit quickens and simplifies drawer box prep with all the tools you need to drill and pre-drill holes and mounting locations for your frames and fixtures. Setting up your project for easy success, the Eclipse Tool Kit is equipped with the following helpers: * 3/32” Drill Bit: This bit works with the Accuride Drilling Jig (4180-0568-XE) to pre-drill holes for disconnect levers. * 4 + ¾”…
Extended access when you need it the most. As part of the CBHAND Locking Handle Kit, the CBHAN4-5 accommodates rear-mounted units, adding a convenient lock-out feature to models 3640A, 7950, 7957, 9301, or other slides with cross-sections of .75” or more. Each CBHAN4-5 kit is equipped with two push buttons, two lock blocks, and one guide bracket to convert your mobile hardware quickly and efficiently.
-
…heavier chassis from 4U to 8U, the 3507 model also includes 2” of substantial over-travel for additional ease of access and maintenance, along with a convenient lock-out to hold chassis open for extended periods. * Supports loads up to 200 lbs. * Tested chassis width at 16” * For additional technical information see below Including guide pins that provide stability and cable management that allows for direct attachment to motion hardware, the 3507 is also engineered with our One Motion Insertion…
-
…solution, providing customizable concealed motion hardware that streamlines versatile, space-saving solutions such as mobile interiors, industrial equipment or machinery, and consumer products and appliances. * Supports loads up to 110 lbs. * Tested drawer width at 24” * For additional technical information see below With your choice of full-extension or over-travel, along with special features like Easy-Close or Self-Close, the 6331 remains a custom designed OEM product available to high-volume…
-
Return to 115RC Product Detail Page Sold as a single component or within a 115RC kit (4180-0746-XE), this cassette model is crafted with stainless steel ball bearings for added strength, providing unerring endurance to your design’s overall function. Easy-to-install and available for flat- or side-mounting, this stainless steel ball bearing carriage adds seamless, smooth motion to your aluminum track hardware.
Available as an optional accessory to aid in the 115RC installation process, this drilling jig is made-to-order and intended for locating holes and pinning multiple lengths of track together.
The 115RC Brackets let installers mount sliding doors onto an Accuride 115RC Linear Track System. Installers simply mount the brackets onto 115RC cassettes with loads distributed evenly to eliminate unwanted torsional effects and ensure smooth movement. The brackets accommodate various door widths and come in three options for door thicknesses up to 40 mm (or 1.57").
Wire Guide Hardware Kit
-
Need a quick lift? Our CBLIFT-050 provides an easy-to-install, remote-controlled television lift solution for entertainment centers and conference room cabinetry where a concealed screen is desired or needed. * Supports loads up to 120 lbs. * Fits standard cabinets 34" tall with minimum cabinet opening of 30" wide * For additional technical information see below Made with reinforced steel rails that provide extra-strength and super-stability, the CBLIFT-050 rises to a fully extended position in…
