Test Suggestion 7
- Products (54)
- Blogs (8)
- Videos (6)
- Newsroom (1)
- Resource Center (2)
…lbs * Over-travel design (2.36") * Stainless-steel components * Dishwasher-safe (NSF-certified) * Screw-mount into place (no welding necessary) * Assemble/disassemble in seconds (no tools needed * Quality tested to 300,000 cycles The ST8211 is perfect for refrigerated compartments, food prep tables, and warming drawers. This Accuride solution comes NSF-certified, quality tested to 300,000 cycles, and backed by Accuride's Limited Lifetime Warranty. Also available in side-mount and full-travel.
…aluminum + stainless steel ball bearings = super-strength. Resistant to moisture, humidity, and corrosion, our AL4120 model can tackle any heavy-duty task while enduring harsh, outdoor, or moist environments. * Supports loads up to 1,212 lbs. * Tested drawer width at 24” * For additional technical information see below From woodworking projects to equipment storage and industrial use, this robust solution offers the same smooth, high-performance without adding extra weight to your existing…
Stainless steel + super-strength. Complete with corrosion-resistance and a heavy-duty load rating, the SS5321 is go-to motion hardware for outdoor fixtures, watercraft, as well as marine and industrial storage. * Supports loads up to 352 lbs. * Tested drawer width at 18” * For additional technical information see below With the added convenience of over-travel for full-access to stored items, the SS5321 also includes a hold-in detent to prevent drawer roll-out and bounce-back, providing reliable…
-
…overachiever with a low profile. Handling heavy-duty, industrial loads, the 301 model also includes over-travel for complete, easy-to-reach access along with an optional bracket kit for electronic enclosure mounting. * Supports loads up to 175 lbs. * Tested drawer width at 16” * For additional technical information see below Non-disconnect motion hardware for added safety in professional workspaces, the 301 is an adept solution for medical equipment, EIA rack-mounted chassis, data processing,…
…solution for dual-access applications. This slide comes with the added benefit of a robust hold-in detent to help keep drawers and trays secured. * Supports loads up to 100 lbs. * Full-extension travel (both directions) * Sold in singles (rather than pairs) * Tested for 80,000 cycles * Backed by a Limited Lifetime Warranty The Accuride 0363 is an ideal solution for kitchen islands, supply carts, and drive-thru pharmacies. For more information, download the Accuride 0363 technical sheet below.
…newly enhanced and super-strong 9300 series from Accuride, the 9322E is the specially crafted, pocket & bayonet, non-locking motion hardware that delivers guidance to the 9328E’s lock-in and lock-out capabilities. * Supports loads up to 600 lbs. * Tested drawer width up to 32” * For additional technical information see below Providing heavy-duty, full-extension assistance to industrial and vehicle hardware and equipment, this companion slide produces the same consistent movement as the 9328E due…
…and fixtures, the 9328E enables tool-less installation that’s labor-saving and cost-effective for equipment drawers or trays in various large vehicles intended for emergency, utility, hazmat, or recreational use. * Supports loads up to 360 lbs. * Tested drawer width up to 32” * For additional technical information see below Fit with an enhanced lock-in and lock-out designed for added reliability, the 9328E also contains a front-latch release that locks hardware in open or closed positions. Along…
…still offers the same security and endurance fit with stainless steel ball bearings and lubricated with food-safe grease for cabinetry in a wide range of spaces--industrial, outdoor, commercial, and residential. * Supports loads up to 143 lbs. * Tested drawer width at 18” * For additional technical information see below A non-disconnect solution for added safety and assurance, the SS0330 also boasts the same corrosion-resistant coating, making it the perfect motion hardware for fixtures subject…
…optional kit for electronic enclosure mounting while also enhancing a versatile array of fixtures, including but not limited to: toolboxes, mechanical devices, point-of-purchase displays, and medical equipment. * Supports loads up to 108 lbs. * Tested drawer width at 16” * For additional technical information see below Equipped with steel ball bearings and non-disconnect for an added element of safety, the 201 comes with Accuride’s trademark clear zinc finish for long-lasting, high-performance…
-
…disconnect, the 204A-LR model also includes our handy lock-out feature, making it go-to motion hardware for mobile fixtures, medical carts, pharmaceutical trays, and high-production, industrial equipment or storage. * Supports loads up to 140 lbs. * Tested drawer width at 16” * For additional technical information see below Because of its lock-out capability, the 204A-LR ensures safe and easy access to stored items, keeping hardware solidly positioned when open. If that's not enough, the front…
…a very low profile. Offering full access to stored items with full-extension movement, the 2601 model is light-duty industrial hardware perfect for tool boxes, laboratory equipment, and commercial-grade fixtures. * Supports loads up to 75 lbs. * Tested drawer width at 16” * For additional technical information see below Because of its extra low profile, the 2601 is not available for flat mounting. However, this motion hardware includes an even 0.50” of side-space along with a hold-in detent that…
…lock-out, front latch disconnect, and over-travel for easy, extended access to stored items, the 305A-LR model is superior motion hardware for just about any industrial fixture--even photographic equipment. * Supports loads up to 140 lbs. * Tested drawer width at 16” * For additional technical information see below With an optional electronic enclosure bracket kit available for EIA rack-mount chassis, the 305A-LR allows for recessed mounting behind cabinet rails, reducing side-space requirements…
