Test Suggestion 8
- Products (74)
- Blogs (3)
- Videos (4)
- Newsroom (1)
- Resource Center (3)
Ensure cabinet security and smooth, lasting drawer movement with the Senseon 38EL. The 38EL is an energy-efficient electronic lock mounted onto an Accuride 3832 drawer slide, creating a slim, compact form that protects virtually any cabinet design. * Voltage: 5v - 24v * Lock Compatible System(s): Senseon One * Applications: Drawers and storage compartments The 38EL has three lock functions to adapt to your operational needs: standard, Touch-Release (push-to-open), and Auto-Open. This family of…
Compatible with models 1332 and 1432, this carrier strip kit is sold separately from D-Pack hardware kits and optimizes pocket and flipper door installation. Each kit includes two black hinge carrier strips, 3 stainless steel connector clips, six #8 x ⅜” black pan head screws (without hinge base plate), six #8 x ⅝” zinc flat head screws (with hinge base plate), and one “Caution” sticker.
The 118RC Cassette is a key innovation within the broader Accuride 118RC Medium-Duty Linear Track System. This novel component uses recirculating balls to let doors, partitions, and panels move smoothly within an aluminum 118RC Track. This version comes with stainless steel balls that prioritize performance, making it ideal for use in industrial environments. (For a version that prioritizes silence, see our 118RC Cassette with Polymer Balls.
The 118RC Cassette is a key innovation within the broader Accuride 118RC Medium-Duty Linear Track System. This novel component uses recirculating balls to let doors, partitions, and panels move smoothly within an aluminum 118RC Track. This version comes with polymer balls that prioritize silence, making it ideal for use in homes, offices, and boutiques. (For a version that prioritizes performance, see our 118RC Cassette with Stainless Steel Balls.)
The 118RC End Stop halts your sliding door or panel to prevent it from damaging surfaces outside the edge of a linear track. This End Stop is a necessary part of the broader Accuride 118RC Medium-Duty Linear Track System.
The 118RC Recycling Bracket magnetically resets the Damper for doors and panels equipped with the Accuride 118RC Medium-Duty Linear Track System. The Recycling Bracket works in tandem with the Damper. Both are simple clip-on accessories: No screws needed!
The Self-Leveling Door Bracket lets you use the Accuride 118RC Medium-Duty Linear Track System with sliding doors. Like all innovations from Accuride, the bracket’s specialties don’t end there: A novel design keeps your door level for smooth and steady motion. You can even install this accessory in as few as three steps! (See the technical sheet under “Downloads” for more information.)
The 118RC Damper cushions that last 2 inches of your sliding door or panel’s movement when equipped with the Accuride 118RC Medium-Duty Linear Track System. This eliminates hard and loud impacts when your door hits the end of the track. The Damper works in tandem with the 118RC Recycling Bracket. Both are simple clip-on accessories: No screws needed!
Compatible with our 123 Flipper Door Slide, this inset base kit includes black 35mm clip-on hinges as well as #6, #8, and M6 Euro screws--plus pivot blocks and one “Caution” sticker.
Compatible with models 1332 and 1432, this carrier strip kit is sold separately from D-Pack hardware kits and optimizes pocket and flipper door installation. Each kit includes two zinc hinge carrier strips, 3 stainless steel connector clips, six #8 x ⅜” black pan head screws (without hinge base plate), six #8 x ⅝” zinc flat head screws (with hinge base plate), and one “Caution” sticker.
Need extra connector clips for your pocket and flipper doors? We've got you covered. Working with vertically-mounted models, such as the 1332 and 1432, this kit includes an extra connector clip and installation screws for steadfast durability and convenience. Each kit includes one stainless steel connector clip, two #8 x ⅜” black electroplate pan-head screws (without hinge base plate), two #8 x ⅝” zinc flat head screws (with hinge base plate), as well as one ‘Caution’ sticker.
Made to accompany our 3135EC, this bracket kit aids in easy-access installation for rear-facing frames and fixtures in need of concealed hardware. Including two rear brackets with a clear zinc finish, this kit also contains six #8 x ⅝” screws and an installation guide--all inside a polybag. This kit is also RoHS-compliant and available for bulk orders.
