Track
- Products (38)
- Blogs (9)
- Videos (4)
- Newsroom (7)
Return to 115RC Product Detail Page Ensuring ease from start to finish. Sold separately or within either 115RC kit (4180-0756-XE/4180-0746-XE), these aluminum end stops ensure that your linear track system ends its length of travel safely and soundly--without slamming or rattling shut. Each order comes with one end stop crafted from corrosion-resistant aluminum and two screws for a breezy installation.
Return to 116RC Product Detail Page Extra protection + Quality assurance. Engineered specifically for the 116RC model, this recycling bracket protects the carriages on your linear track system when a damper (CB0116-DAMP) is installed to cushion a fixture's end of travel. One recycling bracket is needed for each recirculating ball carriage.
Return to 116RC Product Detail Page Finishing touches for sliding door hardware. Engineered for the 116RC Door Hardware Kit, these fascia end caps stabilize the anodized aluminum fascia board on its support beam, specifically for use with track systems on sliding doors. Each order comes with two fascia end caps and eight screws for a thorough installation and robust solution.
The 115RC Brackets let installers mount sliding doors onto an Accuride 115RC Linear Track System. Installers simply mount the brackets onto 115RC cassettes with loads distributed evenly to eliminate unwanted torsional effects and ensure smooth movement. The brackets accommodate various door widths and come in three options for door thicknesses up to 40 mm (or 1.57").
The 115RC Brackets let installers mount sliding doors onto an Accuride 115RC Linear Track System. Installers simply mount the brackets onto 115RC cassettes with loads distributed evenly to eliminate unwanted torsional effects and ensure smooth movement. The brackets accommodate various door widths and come in three options for door thicknesses up to 40 mm (or 1.57").
The 115RC Brackets let installers mount sliding doors onto an Accuride 115RC Linear Track System. Installers simply mount the brackets onto 115RC cassettes with loads distributed evenly to eliminate unwanted torsional effects and ensure smooth movement. The brackets accommodate various door widths and come in three options for door thicknesses up to 40 mm (or 1.57").
The Self-Leveling Door Bracket lets you use the Accuride 118RC Medium-Duty Linear Track System with sliding doors. Like all innovations from Accuride, the bracket’s specialties don’t end there: A novel design keeps your door level for smooth and steady motion. You can even install this accessory in as few as three steps! (See the technical sheet under “Downloads” for more information.)
…self-lubricating carriage and rail to bring motion to your designs—rather than ball bearings in traditional slides and linear track systems. With multiple adjust options (Auto, Non, and Manual) as well as corrosion-resistant aluminum, this friction guide can handle any task and endure the harshest environments. * Supports loads up to 4,000N (900 lbf.) * Aluminum track available in two lengths: 1 meter or 2 meters. * For additional technical information see below Like the 115RC, the FG115’s…
…Product Detail Page True blue linear motion and friction. Boasting a low-maintenance and cost-effective design with advanced technical polymer, this non-adjust carriage supplies quiet, seamless movement to machinery and other industrial fixtures in need of unerring, repetitive performance. Because the tension between this carriage and an FG115 aluminum rail can't be adjusted, this free floating component is actually ideal for correcting any potential misalignments within a parallel track system.
Return to 115RC Product Detail Page Extra Quiet + The Same High Quality. Sold as a single component or within a 115RC kit (4180-0756-XE), this cassette provides flawless, linear motion to aluminum track systems with the use of polymer bearings that guarantee silenced operation. Easy-to-install and available for flat- or side-mounting, this polymer ball bearing carriage adds effortless and reliable motion to your hardware of choice.
Return to 116RC Product Detail Page For robust hardware with a soft side. An optional component for our 116RC Heavy-Duty Linear Track System, this damper cushions and decelerates the last 1.6” of your hardware’s travel for reduced vibration and migration while also providing a smooth, gentle return every time. With the use of this optional damper, end stops are no longer required. However, recycling brackets (SS0166-BRKT01RC) will be needed to protect the carriages, and sliding door fixtures…
The Accuride 1532 Pocket Door System is unrivaled in its design. Engineered for all-around excellence, this system uses a cassette that glides along a precision track to give your pocket door the most refined movement possible. The 1532 is easy to install with no carrier strip. Product selection is also made simple with only two essential parameters: door height and thickness. * Max Door Weight: 100 lbs. * Max Door Height: 118 in. * Max Door Width: 39 in. * Max Door Thickness: 1.25 in. A novel…