Two Side
- Products (40)
- Blogs (1)
- Videos (3)
The Accuride 0363 Two-Way Drawer Slide is a light-duty and full extension solution for dual-access applications. This slide comes with the added benefit of a robust hold-in detent to help keep drawers and trays secured. * Supports loads up to 100 lbs. * Full-extension travel (both directions) * Sold in singles (rather than pairs) * Tested for 80,000 cycles * Backed by a Limited Lifetime Warranty The Accuride 0363 is an ideal solution for kitchen islands, supply carts, and drive-thru pharmacies.…
-
The Accuride AL4165 is an industrial-grade and heavy-duty slide with two-way full travel. The AL4165 uses corrosion-resistant aluminum slide members and stainless-steel bearings, ensuring excellent long-term performance even in tough environments. * Supports loads up to 596 lbs. * Side-mount configuration * Two-way Travel * Corrosion-resistant materials * Full-extension design The AL4165 offers full-extension travel in both directions, while occupying only 1.04 inches of side-space. This slide…
The Accuride ST8210 is the smart option for movement in commercial kitchen appliances. The NSF-certified roller-bearing slide is easy to install and needs little maintenance. Over two inches of extra travel gives you full reach of items in the back of a drawer or tray. The extra room makes searching, sorting, and retrieving items easier, saving time (and money). The ST8210 also has a self-close and auto lock-in design to ensure drawers close properly. * Side-mount * For loads up to 230 lbs *…
-
Motion hardware 2.0. Providing ¾-extension and two-way access for pass-through shelves, kitchen islands, and medical carts, the 2002 model enhances any home or workspace with double the amount of function and chic. * Supports loads up to 50 lbs. * For drawers up to 12” wide * For additional technical information see below Including a center detent that keeps hardware solidly positioned when closed from either direction, this double-extension solution is also fit with tabs for quick mounting of…
-
With an automatic reset stroke of 1.75", the 3832EC model brings drawers to a controlled and satisfying close every single time. Add a bit of much-needed ease to hardware in the home, industrial workspaces, or institutional equipment. * Supports loads up to 100 lbs. * For drawers up to 16” wide * For additional technical information see below Engineered with the end-user in mind, the 3832EC’s Easy-Close mechanism remains partially shielded to prevent small debris particles from interfering with…
With an automatic reset stroke of 1.75", the 3832EC model brings drawers to a controlled and satisfying close every single time. Add a bit of much-needed ease to hardware in the home, industrial workspaces, or institutional equipment. * Supports loads up to 100 lbs. * For drawers up to 16” wide * For additional technical information see below Engineered with the end-user in mind, the 3832EC’s Easy-Close mechanism remains partially shielded to prevent small debris particles from interfering with…
Shallow yet smooth motion hardware. Engineered with a low-profile and lever-disconnect, the 2132 model sets a new standard for the ¾-extension slide. Ideal for small, shallow drawers in office desks, bathrooms, and kitchens, this solution keeps supplies and utensils readily available, day-in and day-out. * Supports loads up to 75 lbs. * For drawers up to 16” wide * For additional technical information see below Backed by BHMA & AWI certification, the 2132 also boasts a hold-in detent and…
Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 18” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.
Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 22” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.
Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832 3732, and 3834, this 14” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.
Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 16” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.
Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 20” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.
