Accessories
- Products (62)
- Resource Center (3)
Renowned hardware + The tools you need. Available as an optional accessory for the 115RC Linear Track System, these nuts and washers aid in the installation of any additional carriages your hardware needs. Each order includes two M5 ⅝” barrel nuts and two star washers.
The 118RC Damper cushions that last 2 inches of your sliding door or panel’s movement when equipped with the Accuride 118RC Medium-Duty Linear Track System. This eliminates hard and loud impacts when your door hits the end of the track. The Damper works in tandem with the 118RC Recycling Bracket. Both are simple clip-on accessories: No screws needed!
Compatible with our 2109 Variable Height Keyboard Slide, this zinc-finished bracket kit allows installers to decide on the most suitable positioning for their hardware, inboard or outboard, while also accommodating suspension adjustment. Each kit includes four mounting brackets as well as bracket mounting screws and slide mounting screws for a convenient and efficient installation process.
Compatible with our 2109 Variable Height Keyboard Slide, this black electroplate finish bracket kit allows installers to decide on the most suitable positioning for their hardware, inboard or outboard, while also accommodating suspension adjustment. Each kit includes four mounting brackets as well as bracket mounting screws and slide mounting screws for a convenient and efficient installation process.
Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 22” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.
Everything you need for effortless linear motion. A complete kit for an easy yet thorough set-up, this 115RC kit includes the following: two polymer ball carriages (CB0115-CASSRC), 2 end stops (AL0115-STOPRC), four M5 ⅝” barrel nuts, and four star washers.
Everything you need for effortless linear motion. A complete kit for an easy yet thorough set-up, this 115RC kit includes the following: two stainless steel ball carriages (SS0115-CASSRC), 2 end stops (AL0115-STOPRC), four M5 ⅝” barrel nuts, and four star washers.
Come extra-prepared with tools for your undermount solution. Compatible with our 3135EC model, the Eclipse Tool Kit quickens and simplifies drawer box prep with all the tools you need to drill and pre-drill holes and mounting locations for your frames and fixtures. Setting up your project for easy success, the Eclipse Tool Kit is equipped with the following helpers: * 3/32” Drill Bit: This bit works with the Accuride Drilling Jig (4180-0568-XE) to pre-drill holes for disconnect levers. * 4 + ¾”…
Precision and ease collide with our Eclipse Jig! Compatible with our 3135EC undermount solution, the Eclipse Drill Jig lends an extra hand for seamless installation, aiding in lever-disconnect assemblies, drawer hooks, front face frame holes, and front side mounts (37mm). For optimal ease and outcomes, we recommend also using the 3/32” Drill Bit (in the optional Eclipse Tool Kit) to control drill depth when drilling.
Made to accompany our 3135EC, this bracket kit aids in easy-access installation for rear-facing frames and fixtures in need of concealed hardware. Including two rear brackets with a clear zinc finish, this kit also contains six #8 x ⅝” screws and an installation guide--all inside a polybag. This kit is also RoHS-compliant and available for bulk orders.
Bottom mount + top-of-mind. Compatible with the 3135EC Eclipse Undermount solution, this bracket kit supplies the tools and instructions for installing the 3135EC for fixtures and frames that require a bottom mount technique. Including four bottom-mount brackets with a zinc finish, this kit also contains eight #8 32 + ¼" self-tapping screws and an installation guide. One RoHS-compliant kit accommodates one pair of 3135EC slides, with bulk orders also available.
Inset installation made simpler! Engineered for use with our 3135EC Eclipse Undermount solution, this bracket kit assists with implementing a flush inset drawer front in need of concealed hardware. Complete with 2 RoHS-compliant inset assemblies with a zinc finish, two #8 32 flat head screws, and an installation guide--all inside a polybag--this kit is also available for bulk orders, fulfilling projects of any scale.