All Products
- Products (13)
- Blogs (4)
- Videos (12)
- Newsroom (2)
- Resource Center (1)
The Accuride LA1815 is a pre-assembled linear track system for light-duty applications. Installers simply mount the track in place onto the cabinet/outer member, then mount a sliding door, panel, or over onto the cassette. * Max Load Rating (Static): 18 lbs. * Max Load Rating (Dynamic): 7 lbs. As with all Accuride products, the LA1815 comes backed by a Limited Lifetime Warranty.
…design to prevent drawers from being removed. * Configuration: Side-Mount * Max Drawer Load: 275 lbs. * Side-Space: 0.75 in. The Accuride 3608 is an ideal movement solution for storage in vehicles and toolboxes. It is also compatible with the EZ-Release Kit for quick, single-handed drawer access. As with all Accuride products, the 3608 has a limited lifetime warranty. For an alternative that supports loads up to 600 pounds, look at the Accuride 9308E Heavy-Duty Lock-In & Lock-Out Slide.
Return to the FG115 Product Detail Page Lightweight material packed with maximum endurance. Engineered with pre-drilled holes and specially designed to accommodate side-, flat-, and vertical-mounting techniques, this aluminum rail serves as the foundation for the FG115 Linear Friction Guide. Self-lubricated for seamless motion, FG115 rails can be cut to a determined length or butted together for an extended span of travel. For optimal performance and longevity, utilize all fixing holes when…
…to FG115 Product Detail Page Lightweight + Low-maintenance. One meter longer than its counterpart (FG115-0100T), this rail is made from the same hard anodized aluminum that serves as the basis for the FG115 Linear Motion Guide's fluid movement and tough outer coating that requires minimal upkeep. Self-lubricated for seamless motion, FG115 rails can be cut to a determined length or butted together for an extended span of travel. For optimal performance and longevity, utilize all fixing holes…
The Self-Leveling Door Bracket lets you use the Accuride 118RC Medium-Duty Linear Track System with sliding doors. Like all innovations from Accuride, the bracket’s specialties don’t end there: A novel design keeps your door level for smooth and steady motion. You can even install this accessory in as few as three steps! (See the technical sheet under “Downloads” for more information.)
Come extra-prepared with tools for your undermount solution. Compatible with our 3135EC model, the Eclipse Tool Kit quickens and simplifies drawer box prep with all the tools you need to drill and pre-drill holes and mounting locations for your frames and fixtures. Setting up your project for easy success, the Eclipse Tool Kit is equipped with the following helpers: * 3/32” Drill Bit: This bit works with the Accuride Drilling Jig (4180-0568-XE) to pre-drill holes for disconnect levers. * 4 + ¾”…
…up to 140 lbs. * For drawers up to 40” wide * Aluminum track in lengths of 24" and 40" * For additional technical information see below * Kit contains: 2 Aluminum Tracks, track cover caps, roller wheel assemblies, track rollers and 4 bumper and end stops. Made with aluminum tracks that can be cut to a custom length, the AL4190 guarantees corrosion-resistance — all the better for mobile or industrial use. This specialty solution is crafted to be fully adjustable with an optional lock-in feature.
-
Heavy-duty made easy. Ranging from large pantry pull-outs or trays, drawers, and shelves throughout homes and workspaces to steadfast equipment storage on utility, service, and recreational vehicles, the 9307E does all the heavy lifting to keep your stored items safe and easy-to-access. * Supports loads up to 600 lbs. * Non-disconnect * For additional technical information see below Equipped with a front latch release that secures drawers and trays in an open position for extended access, the…
…is unrivaled in its design. Engineered for all-around excellence, this system uses a cassette that glides along a precision track to give your pocket door the most refined movement possible. The 1532 is easy to install with no carrier strip. Product selection is also made simple with only two essential parameters: door height and thickness. * Max Door Weight: 100 lbs. * Max Door Height: 118 in. * Max Door Width: 39 in. * Max Door Thickness: 1.25 in. A novel cable system neutralizes “racking”…
Made to accompany our 3135EC, this bracket kit aids in easy-access installation for rear-facing frames and fixtures in need of concealed hardware. Including two rear brackets with a clear zinc finish, this kit also contains six #8 x ⅝” screws and an installation guide--all inside a polybag. This kit is also RoHS-compliant and available for bulk orders.
Inset installation made simpler! Engineered for use with our 3135EC Eclipse Undermount solution, this bracket kit assists with implementing a flush inset drawer front in need of concealed hardware. Complete with 2 RoHS-compliant inset assemblies with a zinc finish, two #8 32 flat head screws, and an installation guide--all inside a polybag--this kit is also available for bulk orders, fulfilling projects of any scale.
-
…heavier or wider drawers. * Includes soft-close action * Handles load up to 150 lbs. * Supports drawer widths up to 36 in. * Made with High-Strength Low-Alloy steel The 3932EC is an ideal movement solution for home and office cabinetry, metal enclosures, and medical carts. This slide comes AWI- and BHMA-certified, RoHS-compliant, and tested to 50,000 cycles. As with all Accuride products, the 3932EC includes a Limited Lifetime Warranty. For an option without Easy-Close, see the 3932 standard.
