Ball Bearing Slides
- Products (16)
- Blogs (1)
- Videos (11)
- Newsroom (1)
-
…Heavy-Duty Full-Extension Slide can be side- or flat-mounted in hardware and fixtures for cookware, toolboxes, equipment storage, and so much more. * Side-mount load capacity up to 350 lbs. * Flat-mount load capacity up to 150 lbs. * For drawers up to 42” wide * For additional technical information see below Designed with a bridged ball retainer that keeps your sliding hardware in sync, the 7950 eliminates inconvenient migration common in more inferior ball bearing slides, and thus brings…
Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 22” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.
Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832 3732, and 3834, this 14” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.
Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 16” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.
Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 18” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.
Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 20” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.
…while also enhancing a versatile array of fixtures, including but not limited to: toolboxes, mechanical devices, point-of-purchase displays, and medical equipment. * Supports loads up to 108 lbs. * Tested drawer width at 16” * For additional technical information see below Equipped with steel ball bearings and non-disconnect for an added element of safety, the 201 comes with Accuride’s trademark clear zinc finish for long-lasting, high-performance motion hardware that simplifies any space.
A bold yet versatile movement solution, the FG115 uses a self-lubricating carriage and rail to bring motion to your designs—rather than ball bearings in traditional slides and linear track systems. With multiple adjust options (Auto, Non, and Manual) as well as corrosion-resistant aluminum, this friction guide can handle any task and endure the harshest environments. * Supports loads up to 4,000N (900 lbf.) * Aluminum track available in two lengths: 1 meter or 2 meters. * For additional…
Stainless steel with safety to boot. With a wider cross-section than the SS2028, the SS0330 model still offers the same security and endurance fit with stainless steel ball bearings and lubricated with food-safe grease for cabinetry in a wide range of spaces--industrial, outdoor, commercial, and residential. * Supports loads up to 143 lbs. * Tested drawer width at 18” * For additional technical information see below A non-disconnect solution for added safety and assurance, the SS0330 also boasts…
…go-to motion hardware contender for wooden furniture and cabinet frames, including built-in storage casework. * Supports loads up to 100 lbs. * For drawers up to 18” wide * For additional technical information see below Designed with polymer ball bearings, the 4035 ensures silenced operation as well as ease in the form of a rail mount/disconnect. Our handy hold-in detent prevents drawers from rattling and re-opening, while a Cam Drawer Adjust allows for precise vertical adjustment, giving you…
-
Recently enhanced with increased load capacity and shock-absorbing ball bearing space bumpers that reduce impact noise, the 9301E model is the gentle giant of movement solutions--ready to boost heavy pull-out pantries, service vehicles, and even ATMs. * Supports loads up to 600 lbs. * For drawers up to 42” wide with slide lengths up to 60" * 9301E accessory bracket kits offer bottom and side mount installation options * For additional technical information see below Tested for a total of 50,000…
Lightweight aluminum + stainless steel ball bearings = super-strength. Resistant to moisture, humidity, and corrosion, our AL4120 model can tackle any heavy-duty task while enduring harsh, outdoor, or moist environments. * Supports loads up to 1,212 lbs. * Tested drawer width at 24” * For additional technical information see below From woodworking projects to equipment storage and industrial use, this robust solution offers the same smooth, high-performance without adding extra weight to your…
