Linear Slides
- Products (20)
- Blogs (3)
- Videos (4)
- Newsroom (4)
Return to 116RC Product Detail Page Structural support for load-bearing walls. A component within the Sliding Door Hardware Kit for the 116RC Heavy-Duty Linear Track System, this support beam anchors your motion hardware securely for tried and true performance that endures the test of time.
Return to 116RC Product Detail Page The sum of its parts. A component within the Sliding Door Hardware Kit for the 116RC Heavy-Duty Linear Track System, this 142” fascia is crafted from anodized aluminum and clips onto its support beam (AL0116-SUPPRC) for a sleek, completed design. For extra easy-access, an installer can lift and hook the fascia open to reach the track and fittings responsible for linear motion.
Ease + Security + Effortless Linear Motion. Available as an optional accessory, the 115RC Easy-Close Kit adds a patented soft-close feature to your hardware, slowing its movement towards the end of travel. Providing 3 lbs. of pull force and extra resistance, the Easy-Close feature acts similar to a hold-in detent--preventing drawer slamming, racking, and side-to-side movement.
The 118RC End Stop halts your sliding door or panel to prevent it from damaging surfaces outside the edge of a linear track. This End Stop is a necessary part of the broader Accuride 118RC Medium-Duty Linear Track System.
Return to 116RC Product Detail Page Extra smooth movement and proven endurance. Specially engineered for the 116RC Sliding Door Hardware Kit, this door bracket kit helps protect your linear track system’s carriages when a damper (CB0116-DAMP) is installed to cushion a fixture’s end of travel.
The 118RC Damper cushions that last 2 inches of your sliding door or panel’s movement when equipped with the Accuride 118RC Medium-Duty Linear Track System. This eliminates hard and loud impacts when your door hits the end of the track. The Damper works in tandem with the 118RC Recycling Bracket. Both are simple clip-on accessories: No screws needed!
…with a soft side. An optional component for our 116RC Heavy-Duty Linear Track System, this damper cushions and decelerates the last 1.6” of your hardware’s travel for reduced vibration and migration while also providing a smooth, gentle return every time. With the use of this optional damper, end stops are no longer required. However, recycling brackets (SS0166-BRKT01RC) will be needed to protect the carriages, and sliding door fixtures will require a separate bracket kit. Your hardware deserves…
-
Medium-duty load bearing for your metal fixtures. Engineered with pocket and bayonet mounting for a quick, tool-less installation, the 3320 model adds full-extension, linear motion to wider drawers and trays in supply cabinets, workbenches, and other industrial applications. * Supports loads up to 120 lbs. * Tested drawer width at 24” * For additional technical information see below Non-disconnect to ensure safety in workspaces and stations, the 3320 also includes silenced operation and a…
