Sliding Door Track
- Products (16)
- Blogs (2)
- Videos (4)
- Newsroom (2)
…for the sliding door market, also accommodating large screens, panels, movable walls, barn doors, and so much more. * Supports loads up to 793 lbs. * Aluminum track in a choice of two lengths: 94.5" and 142" Purchase of the 116RC requires the following components Carriage (Min. Quantity: 1) * SS0116-CASSRC: Carriage – Stainless Steel Balls * CB0116-CASSRC: Carriage – Polymer Balls Track (Min. Quantity: 1) * AL0116-024RC: 94.5" Aluminum Track * AL0116-036RC: 141.7" Aluminum Track NOTE:…
The Self-Leveling Door Bracket lets you use the Accuride 118RC Medium-Duty Linear Track System with sliding doors. Like all innovations from Accuride, the bracket’s specialties don’t end there: A novel design keeps your door level for smooth and steady motion. You can even install this accessory in as few as three steps! (See the technical sheet under “Downloads” for more information.)
The Accuride LA1815 is a pre-assembled linear track system for light-duty applications. Installers simply mount the track in place onto the cabinet/outer member, then mount a sliding door, panel, or over onto the cassette. * Max Load Rating (Static): 18 lbs. * Max Load Rating (Dynamic): 7 lbs. As with all Accuride products, the LA1815 comes backed by a Limited Lifetime Warranty.
…cassettes within an aluminum track to deliver effortless linear movement. The 118RC is also extra-versatile by design, allowing you to mount sideways, flatly, or underhung with no negative effect on performance. * Max Load: 800 lbs. * Available Length(s): 94.5 in. Choose from two cassette options: a version with stainless steel balls for performance and another with polymer balls for silenced movement. The 118RC is the ideal movement solution for sliding doors, partitions, and worktops.…
Return to 116RC Product Detail Page Extra smooth movement and proven endurance. Specially engineered for the 116RC Sliding Door Hardware Kit, this door bracket kit helps protect your linear track system’s carriages when a damper (CB0116-DAMP) is installed to cushion a fixture’s end of travel.
…that glides along a precision track to give your pocket door the most refined movement possible. The 1532 is easy to install with no carrier strip. Product selection is also made simple with only two essential parameters: door height and thickness. * Max Door Weight: 100 lbs. * Max Door Height: 118 in. * Max Door Width: 39 in. * Max Door Thickness: 1.25 in. A novel cable system neutralizes “racking” when opening pocket doors, while special hinges bring those doors to a soft and silent close. The…
The 115RC Brackets let installers mount sliding doors onto an Accuride 115RC Linear Track System. Installers simply mount the brackets onto 115RC cassettes with loads distributed evenly to eliminate unwanted torsional effects and ensure smooth movement. The brackets accommodate various door widths and come in three options for door thicknesses up to 40 mm (or 1.57").
The 115RC Brackets let installers mount sliding doors onto an Accuride 115RC Linear Track System. Installers simply mount the brackets onto 115RC cassettes with loads distributed evenly to eliminate unwanted torsional effects and ensure smooth movement. The brackets accommodate various door widths and come in three options for door thicknesses up to 40 mm (or 1.57").
The 115RC Brackets let installers mount sliding doors onto an Accuride 115RC Linear Track System. Installers simply mount the brackets onto 115RC cassettes with loads distributed evenly to eliminate unwanted torsional effects and ensure smooth movement. The brackets accommodate various door widths and come in three options for door thicknesses up to 40 mm (or 1.57").
Return to 116RC Product Detail Page Finishing touches for sliding door hardware. Engineered for the 116RC Door Hardware Kit, these fascia end caps stabilize the anodized aluminum fascia board on its support beam, specifically for use with track systems on sliding doors. Each order comes with two fascia end caps and eight screws for a thorough installation and robust solution.
Return to 116RC Product Detail Page Structural support for load-bearing walls. A component within the Sliding Door Hardware Kit for the 116RC Heavy-Duty Linear Track System, this support beam anchors your motion hardware securely for tried and true performance that endures the test of time.
Return to 116RC Product Detail Page The sum of its parts. A component within the Sliding Door Hardware Kit for the 116RC Heavy-Duty Linear Track System, this 142” fascia is crafted from anodized aluminum and clips onto its support beam (AL0116-SUPPRC) for a sleek, completed design. For extra easy-access, an installer can lift and hook the fascia open to reach the track and fittings responsible for linear motion.