Pocket Door Slide 1316--1319
- Products (175)
- Blogs (52)
- Videos (34)
- Newsroom (49)
- Resource Center (13)
The Accuride 123 Pocket Door Slide is an easy-to-install movement solution for concealed cabinet doors. This slide uses a novel design for self-alignment, ensuring smooth movement. The Accuride 123 allows a door to retract within a cabinet, preserving a clean esthetic. * Supports loads up to 30 lbs. * For pocket doors up to 42” tall x 24” wide * Features self-aligning movement * Vertically or horizontally mounted * Available in black (CB) finish * Includes 35mm hinges * Backed by a…
The Accuride CB1234 Pocket Door Slide is an easy-to-install movement solution for concealed cabinet doors. The slide uses a novel design for self-alignment, ensuring smooth movement. The Accuride CB1234 allows a door to retract within a cabinet, preserving a clean esthetic. * Support loads up to 30 lbs. * For pocket doors up to 42” tall x 24” wide * Features self-aligning movement * Vertically or horizontally mounted * Available in black (CB) finish * Backed by a Limited Lifetime…
…along a precision track to give your pocket door the most refined movement possible. The 1532 is easy to install with no carrier strip. Product selection is also made simple with only two essential parameters: door height and thickness. * Max Door Weight: 100 lbs. * Max Door Height: 118 in. * Max Door Width: 39 in. * Max Door Thickness: 1.25 in. A novel cable system neutralizes “racking” when opening pocket doors, while special hinges bring those doors to a soft and silent close. The 1532 is…
-
…your pocket doors are extended fully before closing. * Supports loads up to 30 lbs. * For pocket doors up to 24" wide x 42" tall * Works with either flipper (horizontal) or pocket (vertical) doors * For additional technical information, see below The 1321 is ideal for home and office cabinets as well as built-in storage casework, this pocket door slide assures quick and hassle-free installation. Additionally, the 1321’s design eliminates scuff- and scrape-causing impacts on your pocket doors.
-
Made for tall and heavy pocket doors, the Accuride CB1432 slide provides smooth and silent movement for media centers, armoires, and concealed storage. The CB1432 also includes Accuride’s advanced cable system, which eliminates “racking” often found when opening or closing tall cabinet doors. * For loads up to 75 lbs. * For pocket doors up to 78” tall x 26” wide * Features advanced Anti-Rak stabilizer system * Features self-aligning movement * Vertically or…
Made for tall and heavy pocket doors, the Accuride CB1332 slide provides smooth and silent movement for media centers, armoires, and concealed storage. The CB1332 also includes Accuride’s advanced cable system, which eliminates “racking” often found when opening or closing tall cabinet doors. * For loads up to 75 lbs. * For pocket doors up to 78” tall x 26” wide * Features advanced Anti-Rak stabilizer system * Features self-aligning movement * Vertically or…
Hinge for overlay doors with models 123 and 1234 pocket door slides.
The Self-Leveling Door Bracket lets you use the Accuride 118RC Medium-Duty Linear Track System with sliding doors. Like all innovations from Accuride, the bracket’s specialties don’t end there: A novel design keeps your door level for smooth and steady motion. You can even install this accessory in as few as three steps! (See the technical sheet under “Downloads” for more information.)
Return to 116RC Product Detail Page Extra smooth movement and proven endurance. Specially engineered for the 116RC Sliding Door Hardware Kit, this door bracket kit helps protect your linear track system’s carriages when a damper (CB0116-DAMP) is installed to cushion a fixture’s end of travel.
…companion slide to the 9328E model. A member of the newly enhanced and super-strong 9300 series from Accuride, the 9322E is the specially crafted, pocket & bayonet, non-locking motion hardware that delivers guidance to the 9328E’s lock-in and lock-out capabilities. * Supports loads up to 600 lbs. * Tested drawer width up to 32” * For additional technical information see below Providing heavy-duty, full-extension assistance to industrial and vehicle hardware and equipment, this companion slide…
Enhanced movement and extended access. Designed for pocket & bayonet mounting in metal hardware and fixtures, the 9328E enables tool-less installation that’s labor-saving and cost-effective for equipment drawers or trays in various large vehicles intended for emergency, utility, hazmat, or recreational use. * Supports loads up to 360 lbs. * Tested drawer width up to 32” * For additional technical information see below Fit with an enhanced lock-in and lock-out designed for added reliability, the…
Mounting bracket kit for 1145 or 1155 Flipper Door Slides
