Sidemount

VIEW AS:
Grid List

Items 1 - 12 of 22

  • 1
  • 2
per page
  1. …movement solution features a low-maintenance design built to handle the rigors of frequent use. The ST8200 provides you with hassle-free installation (welding not necessary) and added conveniences, including self-close and auto lock-in features. * Side-mount configuration. * Easy to install * Stainless-steel construction * Full-extension design (over-travel upon request) * Max Load rating: 125 lbs. * Available in even lengths 16" - 30" * Dishwasher safe * NSF certified The Accuride ST8200 is an…

  2. …full reach of items in the back of a drawer or tray. The extra room makes searching, sorting, and retrieving items easier, saving time (and money). The ST8210 also has a self-close and auto lock-in design to ensure drawers close properly.   * Side-mount * For loads up to 230 lbs * Over-travel design (2.36") * Stainless-steel components * Dishwasher-safe (NSF-certified) * Screw-mount into place (no welding necessary) * Assemble/disassemble in seconds (no tools needed * Quality tested to 300,000…

  3. With an automatic reset stroke of 1.75", the 3832EC model brings drawers to a controlled and satisfying close every single time. Add a bit of much-needed ease to hardware in the home, industrial workspaces, or institutional equipment. * Supports loads up to 100 lbs. * For drawers up to 16” wide * For additional technical information see below Engineered with the end-user in mind, the 3832EC’s Easy-Close mechanism remains partially shielded to prevent small debris particles from interfering with…

  4. With an automatic reset stroke of 1.75", the 3832EC model brings drawers to a controlled and satisfying close every single time. Add a bit of much-needed ease to hardware in the home, industrial workspaces, or institutional equipment. * Supports loads up to 100 lbs. * For drawers up to 16” wide * For additional technical information see below Engineered with the end-user in mind, the 3832EC’s Easy-Close mechanism remains partially shielded to prevent small debris particles from interfering with…

  5. 5410-0804-CE 22" Clip-On Bracket
    $5.44

    Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 22” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  6. Return to 116RC Product Detail Page Extra Quiet + Renowned Quality. Sold as a single, extra component or within the 116RC kit, this cassette provides flawless, linear motion to aluminum track systems with the use of polymer bearings that guarantee silenced operation. Easy-to-install and available for flat- or side-mounting, this polymer ball bearing carriage adds smooth and reliable motion to your hardware of choice.

  7. 5410-0800-CE 14" Clip-On Bracket
    $5.44

    Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832 3732, and 3834, this 14” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  8. 5410-0801-CE 16" Clip-On Bracket
    $5.44

    Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 16” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  9. 5410-0802-CE 18" Clip-On Bracket
    $5.44

    Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 18” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  10. 5410-0803-CE 20" Clip-On Bracket
    $5.44

    Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 20” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  11. Return to 116RC Product Detail Report Available as a single component or within a kit for our 116RC Linear Track System, this cassette model is crafted with stainless steel ball bearings for added strength, providing unerring endurance to your design’s overall function. Easy-to-install and available for flat- or side-mounting, this stainless steel ball bearing carriage adds heavy-duty seamless, smooth motion to your aluminum track hardware.

  12. Return to 115RC Product Detail Page Extra Quiet + The Same High Quality. Sold as a single component or within a 115RC kit (4180-0756-XE), this cassette provides flawless, linear motion to aluminum track systems with the use of polymer bearings that guarantee silenced operation. Easy-to-install and available for flat- or side-mounting, this polymer ball bearing carriage adds effortless and reliable motion to your hardware of choice.

VIEW AS:
Grid List

Items 1 - 12 of 22

  • 1
  • 2
per page