Test Suggestion 1

  • Products (91)
VIEW AS:
Grid List

Items 25 - 36 of 91

per page
  1. …doors, and so much more. * Supports loads up to 793 lbs. * Aluminum track in a choice of two lengths: 94.5" and 142" Purchase of the 116RC requires the following components Carriage (Min. Quantity: 1) * SS0116-CASSRC: Carriage – Stainless Steel Balls * CB0116-CASSRC: Carriage – Polymer Balls Track (Min. Quantity: 1) * AL0116-024RC: 94.5" Aluminum Track * AL0116-036RC: 141.7" Aluminum Track NOTE: Purchase of optional Aluminum End Stop (AL0116-STOPRC) requires Recycling Bracket (SS0116-BRKT01RC).

  2. Compatible with our 2109 Variable Height Keyboard Slide, this black electroplate finish bracket kit allows installers to decide on the most suitable positioning for their hardware, inboard or outboard, while also accommodating suspension adjustment. Each kit includes four mounting brackets as well as bracket mounting screws and slide mounting screws for a convenient and efficient installation process.

  3. 5410-0801-CE 16" Clip-On Bracket
    $4.34

    Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 16” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  4. …up to 265 lbs. * Aluminum tracks available in two lengths: 47" and 94,” with or without pre-drilled holes Purchase of the 115RC requires the following components: Carriage (Min. Quantity: 1) * SS0115-CASSRC: Carriage – Stainless Steel Balls * CB0115-CASSRC: Carriage – Polymer Balls Track (Min. Quantity: 1) * AL0115-0120RCH: 47" Aluminum Track w/ Pre-Drilled holes * AL0115-0240RCH: 94" Aluminum Track w/ Pre-Drilled holes * AL0115-0120RC: 47" Aluminum Track w/o Pre-Drilled holes * AL0115-0240RC:…

  5. Return to 116RC Product Detail Page Extra protection + Quality assurance. Engineered specifically for the 116RC model, this recycling bracket protects the carriages on your linear track system when a damper (CB0116-DAMP) is installed to cushion a fixture's end of travel. One recycling bracket is needed for each recirculating ball carriage.

  6. Just when you thought a movement solution couldn’t get any stronger. Offering full-extension, a little extra side-space, and an increased load capacity compared to to its AL4120 counterpart, the AL4140 model combines the same super-strength and corrosion-resistance to maximize your machinery, cabinet frames, and so much more. * Supports loads up to 1,323 lbs. * 1.5” side-space * For additional technical information see below From hardware in cellars to heavy-duty appliances, this tough-as-nails…

  7. You'll never have trouble reaching the back of the drawer ever again. Designed with 1" over-travel, the 3834E model is an enhanced movement solution, providing strength, convenience, and smooth motion to residential and commercial fixtures in need of extra access. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below On top of silenced operation, the 3834E boasts a hold-in detent to prevent drawer roll-out and bounce-back--you can say…

  8. You'll never have trouble reaching the back of the drawer ever again. Designed with 1" over-travel, the 3834E model is an enhanced movement solution, providing strength, convenience, and smooth motion to residential and commercial fixtures in need of extra access. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below On top of silenced operation, the 3834E boasts a hold-in detent to prevent drawer roll-out and bounce-back--you can say…

  9. Adjustable rear mounting bracket for use with 1029 slide.

  10. A bracket kit for allowing the 2132 to be mounted into face frame cabinets.

  11. 4180-0431-XE 3732 Rear Bracket Kit
    $5.63

    A rear bracket for installing the 3732 into face frame cabinets.

  12. Revitalize your cabinets with this pocket/flipper door slide. The Pro Pocket supports both inset and ¾ full-overlay with an “Auto Open” feature. The Auto Open gently springs doors forward the last 1¼" of travel. This ensures your pocket doors are extended fully before closing. * Supports loads up to 30 lbs. * For pocket doors up to 24" wide x 42" tall * Works with either flipper (horizontal) or pocket (vertical) doors * For additional technical information, see below The 1321 is ideal for home…

VIEW AS:
Grid List

Items 25 - 36 of 91

per page