Test Suggestion 1
- Products (112)
- Blogs (14)
- Videos (21)
- Newsroom (14)
- Resource Center (4)
Compatible with our 123 Flipper Door Slide, this inset base kit includes black 35mm clip-on hinges as well as #6, #8, and M6 Euro screws--plus pivot blocks and one “Caution” sticker.
Adjustable rear mounting bracket for use with 1029 slide.
A bracket kit for allowing the 2132 to be mounted into face frame cabinets.
A rear bracket for installing the 3732 into face frame cabinets.
Ensure cabinet security and smooth, lasting drawer movement with the Senseon 38EL. The 38EL is an energy-efficient electronic lock mounted onto an Accuride 3832 drawer slide, creating a slim, compact form that protects virtually any cabinet design. * Voltage: 5v - 24v * Lock Compatible System(s): Senseon One * Applications: Drawers and storage compartments The 38EL has three lock functions to adapt to your operational needs: standard, Touch-Release (push-to-open), and Auto-Open. This family of…
…up to 265 lbs. * Aluminum tracks available in two lengths: 47" and 94,” with or without pre-drilled holes Purchase of the 115RC requires the following components: Carriage (Min. Quantity: 1) * SS0115-CASSRC: Carriage – Stainless Steel Balls * CB0115-CASSRC: Carriage – Polymer Balls Track (Min. Quantity: 1) * AL0115-0120RCH: 47" Aluminum Track w/ Pre-Drilled holes * AL0115-0240RCH: 94" Aluminum Track w/ Pre-Drilled holes * AL0115-0120RC: 47" Aluminum Track w/o Pre-Drilled holes * AL0115-0240RC:…
The 115RC Brackets let installers mount sliding doors onto an Accuride 115RC Linear Track System. Installers simply mount the brackets onto 115RC cassettes with loads distributed evenly to eliminate unwanted torsional effects and ensure smooth movement. The brackets accommodate various door widths and come in three options for door thicknesses up to 40 mm (or 1.57").
The 115RC Brackets let installers mount sliding doors onto an Accuride 115RC Linear Track System. Installers simply mount the brackets onto 115RC cassettes with loads distributed evenly to eliminate unwanted torsional effects and ensure smooth movement. The brackets accommodate various door widths and come in three options for door thicknesses up to 40 mm (or 1.57").
-
Just when you thought a movement solution couldn’t get any stronger. Offering full-extension, a little extra side-space, and an increased load capacity compared to to its AL4120 counterpart, the AL4140 model combines the same super-strength and corrosion-resistance to maximize your machinery, cabinet frames, and so much more. * Supports loads up to 1,323 lbs. * 1.5” side-space * For additional technical information see below From hardware in cellars to heavy-duty appliances, this tough-as-nails…
-
You'll never have trouble reaching the back of the drawer ever again. Designed with 1" over-travel, the 3834E model is an enhanced movement solution, providing strength, convenience, and smooth motion to residential and commercial fixtures in need of extra access. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below On top of silenced operation, the 3834E boasts a hold-in detent to prevent drawer roll-out and bounce-back--you can say…
-
You'll never have trouble reaching the back of the drawer ever again. Designed with 1" over-travel, the 3834E model is an enhanced movement solution, providing strength, convenience, and smooth motion to residential and commercial fixtures in need of extra access. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below On top of silenced operation, the 3834E boasts a hold-in detent to prevent drawer roll-out and bounce-back--you can say…
Return to 116RC Product Detail Page For robust hardware with a soft side. An optional component for our 116RC Heavy-Duty Linear Track System, this damper cushions and decelerates the last 1.6” of your hardware’s travel for reduced vibration and migration while also providing a smooth, gentle return every time. With the use of this optional damper, end stops are no longer required. However, recycling brackets (SS0166-BRKT01RC) will be needed to protect the carriages, and sliding door fixtures…
