Test Suggestion 2
- Products (114)
- Blogs (10)
- Videos (17)
- Newsroom (5)
- Resource Center (2)
-
Go with the Accuride Original line of motion hardware. Complete with enhanced strength and movement, full-extension, and a lever-disconnect, the 3832E model is a classic drawer slide that fits a wide range of uses including but not limited to: pull-out shelves, kitchen utensil drawers, and point-of-sales trays. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below A patented Cam Drawer Adjust allows for precise vertical adjustment, while a…
Stainless steel hardware with a narrow profile. With a corrosion-resistant coating, the SS2028 model is perfect for fixtures that need to withstand moisture or high levels of humidity--including but not limited to industrial machines, outdoor hardware, and commercial or residential kitchens. * Supports loads up to 100 lbs. * For drawers up to 18” wide * For additional technical information see below Non-disconnect for added safety, the SS2028 also includes a standard ¾-extension and a hold-in…
The 94.5-inch Track is a key part of the Accuride 118RC Medium-Duty Linear Track System. Each aluminum track measures 94.5 inches (or 2.4 meters) that you can cut or combine with other 118RC tracks for any desired length. You can even drill holes for your unique mounting needs!
The Accuride C4170 is our most robust movement solution yet. This super heavy-duty slide delivers smooth, full-extension movement for loads up to 2,150 pounds. Thanks to specially reinforced steel construction, including an I-beam intermediate member, the C4170 is engineered to work continually under the most extreme stress and conditions. * Configuration: Side-Mount * Max Drawer Load: 2,150 lbs.* * Level of Travel: Full (100%) The Accuride C4170 Super Heavy-Duty Slide is an ideal movement…
Return to 115RC Product Detail Page Corrosion-resistance + linear motion you can count on. Sold separately yet compatible with both 115RC kits (4180-0756-XE/4180-0746-XE), this 94” aluminum track includes pre-drilled holes, acting as the solid foundation for a lightweight, reliable movement solution. For further customization, aluminum tracks may be cut to a desired length or butted together to extend length of travel.
An ergonomic keyboard tray solution. Including built-in cable management along with a removable palm rest and mouse pad, the CBERGO-Tray 200 is a fantastic addition to any computer workstation. * ¾-extension * Unit width at 29.6” * For additional technical information see below Complete with adjustable mounting brackets that allow you to mount the keyboard tray inboard or outboard, installation is made simple yet versatile, and slides remain entirely concealed in the finished design. If that's…
-
Designed to withstand moderate weather conditions. With a special, weather-resistant coating that provides eight times more protection than a standard zinc finish, the CH3832E model is perfect for fixtures and hardware that receive exposure to the elements--such as greenhouses, locker rooms, garages, grill stations, and more! * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below Comprised of a stainless-steel ball retainer, ball bearings,…
The 115RC Brackets let installers mount sliding doors onto an Accuride 115RC Linear Track System. Installers simply mount the brackets onto 115RC cassettes with loads distributed evenly to eliminate unwanted torsional effects and ensure smooth movement. The brackets accommodate various door widths and come in three options for door thicknesses up to 40 mm (or 1.57").
…the Accuride Drilling Jig (4180-0568-XE) to pre-drill holes for disconnect levers. * 4 + ¾” Drill Extension: Paired with the 3/32” Drill Bit, this extension improves access when pre-drilling disconnect lever holes at the required 10-degree angle. * #2 x 4” Phillips Point Screwdriver Bit: The length on this bit gives installers better access when installing the screws for the disconnect levers. * ¼” Brad Point Drill Bit: This bit is designed for drilling the hook holes in the back of the drawer.…
-
The Accuride AL4165 is an industrial-grade and heavy-duty slide with two-way full travel. The AL4165 uses corrosion-resistant aluminum slide members and stainless-steel bearings, ensuring excellent long-term performance even in tough environments. * Supports loads up to 596 lbs. * Side-mount configuration * Two-way Travel * Corrosion-resistant materials * Full-extension design The AL4165 offers full-extension travel in both directions, while occupying only 1.04 inches of side-space. This slide…
Shallow yet smooth motion hardware. Engineered with a low-profile and lever-disconnect, the 2132 model sets a new standard for the ¾-extension slide. Ideal for small, shallow drawers in office desks, bathrooms, and kitchens, this solution keeps supplies and utensils readily available, day-in and day-out. * Supports loads up to 75 lbs. * For drawers up to 16” wide * For additional technical information see below Backed by BHMA & AWI certification, the 2132 also boasts a hold-in detent and…
Compatible with our 1332 solution and accommodating pocket doors ¾” to 13/16” thick, this hinge kit provides the extra tools you need for an inset installation. Each order includes two 35mm salice black clip-on hinges, two 3mm mounting base plates, two 3mm hinge base spacers, two hinge arm cover caps, four #6 x ⅝” Phillips flat head screws, and one “Caution” door sticker.
