Test Suggestion 2
- Products (114)
- Blogs (10)
- Videos (17)
- Newsroom (5)
- Resource Center (2)
Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 20” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.
Compatible with models 1332 and 1432, this carrier strip kit is sold separately from D-Pack hardware kits and optimizes pocket and flipper door installation. Each kit includes two black hinge carrier strips, 3 stainless steel connector clips, six #8 x ⅜” black pan head screws (without hinge base plate), six #8 x ⅝” zinc flat head screws (with hinge base plate), and one “Caution” sticker.
Compatible with models 1332 and 1432, this carrier strip kit is sold separately from D-Pack hardware kits and optimizes pocket and flipper door installation. Each kit includes two zinc hinge carrier strips, 3 stainless steel connector clips, six #8 x ⅜” black pan head screws (without hinge base plate), six #8 x ⅝” zinc flat head screws (with hinge base plate), and one “Caution” sticker.
A bracket kit for flush inset drawer fronts. Compatible with our 3135EC undermount solution, this kit includes one pair of bottom inset bracket assemblies in a zinc finish, adding ease and precision to alternative frames and mounting styles. For thorough installation, a rear face frame bracket (4180-0656-XE) is also required. Along with both brackets, this single kit also comes with two each #8-32 flat head screws, and an installation guide inside a polybag. Cabinet mounting screws are not…
Seamless movement paired with infinite possibilities. The endlessly versatile 115RC Linear Track System contains lightweight, corrosion-resistant tracks that can be side, flat, or vertically mounted—offering reliable guidance to movable walls, sliding racks, screens, panels, partitions, and even assembly lines. * Supports loads up to 265 lbs. * Aluminum tracks available in two lengths: 47" and 94,” with or without pre-drilled holes Purchase of the 115RC requires the following components:…
The 3641X Heavy-Duty Interlock System is the premier movement solution for tall, multi-drawer cabinets. Supporting wider and heavier drawers, this system allows only one drawer to open at a time. The 3641X remains most adept in lateral filing storage at the office and the home. (For a standalone interlock slide, see Model 3641.) * Supports loads up to 180 lbs. * For drawers up to 42” wide * Requires .89" of side-space The 3641X is a complete system that includes: one 3641 Interlock slide, one…
The Accuride 118RC Medium-Duty Linear Track System is your go-to movement solution for sliding entries up to 800 pounds. This system uses innovative and durable cassettes within an aluminum track to deliver effortless linear movement. The 118RC is also extra-versatile by design, allowing you to mount sideways, flatly, or underhung with no negative effect on performance. * Max Load: 800 lbs. * Available Length(s): 94.5 in. Choose from two cassette options: a version with stainless steel balls for…
The Accuride 1532 Pocket Door System is unrivaled in its design. Engineered for all-around excellence, this system uses a cassette that glides along a precision track to give your pocket door the most refined movement possible. The 1532 is easy to install with no carrier strip. Product selection is also made simple with only two essential parameters: door height and thickness. * Max Door Weight: 100 lbs. * Max Door Height: 118 in. * Max Door Width: 39 in. * Max Door Thickness: 1.25 in. A novel…
Working with both CBHAND kits, one order includes two stainless steel rods that aid in lock-in and/or lock-out conversions for models 3640A, 7950, 7957, 9301, or other slides with cross-sections of .75” or more.
Working with both CBHAND kits, one order includes two stainless steel rods that aid in lock-in and/or lock-out conversions for models 3640A, 7950, 7957, 9301, or other slides with cross-sections of .75” or more.
-
Because heavier-duty shouldn’t mean more difficult. Specially designed to handle heavier chassis from 4U to 8U, the 3507 model also includes 2” of substantial over-travel for additional ease of access and maintenance, along with a convenient lock-out to hold chassis open for extended periods. * Supports loads up to 200 lbs. * Tested chassis width at 16” * For additional technical information see below Including guide pins that provide stability and cable management that allows for direct…
