Test Suggestion 3
- Products (72)
- Blogs (9)
- Videos (13)
- Newsroom (3)
- Resource Center (3)
…optional kit for electronic enclosure mounting while also enhancing a versatile array of fixtures, including but not limited to: toolboxes, mechanical devices, point-of-purchase displays, and medical equipment. * Supports loads up to 108 lbs. * Tested drawer width at 16” * For additional technical information see below Equipped with steel ball bearings and non-disconnect for an added element of safety, the 201 comes with Accuride’s trademark clear zinc finish for long-lasting, high-performance…
…a very low profile. Offering full access to stored items with full-extension movement, the 2601 model is light-duty industrial hardware perfect for tool boxes, laboratory equipment, and commercial-grade fixtures. * Supports loads up to 75 lbs. * Tested drawer width at 16” * For additional technical information see below Because of its extra low profile, the 2601 is not available for flat mounting. However, this motion hardware includes an even 0.50” of side-space along with a hold-in detent that…
…lock-out, front latch disconnect, and over-travel for easy, extended access to stored items, the 305A-LR model is superior motion hardware for just about any industrial fixture--even photographic equipment. * Supports loads up to 140 lbs. * Tested drawer width at 16” * For additional technical information see below With an optional electronic enclosure bracket kit available for EIA rack-mount chassis, the 305A-LR allows for recessed mounting behind cabinet rails, reducing side-space requirements…
-
…handy lock-out feature that holds drawers, trays, and chassis solidly positioned when open for extended, easy-access, the 3307 model enhances a bevy of industrial, electronic, and medical fixtures or equipment. * Supports loads up to 150 lbs. * Tested drawer width at 16” * For additional technical information see below This motion hardware's over-travel ability consistently ensures that items, cables, and other storage remain easy-to-reach, while an optional bracket kit makes the 3307 a viable…
-
…and keeping hardware solidly positioned when open or closed, the 3308 model ensures safety and easy-access for electronic enclosures, cash drawers, industrial workstations, medical emergency carts, and even vending machines. * Supports loads up to 150 lbs. * Tested drawer width at 16” * For additional technical information see below Equipped with over-travel and our easy-to-use lever disconnect, the 3308 brings simplicity and endurance to any hardware or space in need of unfailing linear motion.
-
…and additional ease while handling heavier loads, the 3601 speaks for itself by lending high-performing movement to utility and industrial truck bodies, machine tools, mechanical devices, workstations, and more. * Supports loads up to 255 lbs. * Tested drawer width at 16” * For additional technical information see below Also equipped with a hold-in detent to prevent drawer roll-out and bounce-back, the 3601 is prepared to give any industrial hardware an extra boost of high-quality and convenient…
…elements of the slide to produce smooth and consistent linear movement, the 115 model is a versatile solution that provides support, guidance, or adjustment in a wide array of industrial fixtures and machines. * Supports loads up to 132 lbs. * For additional technical information see below Tested at 10,000 cycles per pair to guarantee unerring strength and endurance, the 115 linear motion slide remains flexible to specific and unique designs with flat-, side-, and vertical-mounting capabilities.
-
…vehicles, and even ATMs. * Supports loads up to 600 lbs. * For drawers up to 42” wide with slide lengths up to 60" * 9301E accessory bracket kits offer bottom and side mount installation options * For additional technical information see below Tested for a total of 50,000 cycles at maximum load capacity, the 9301E solution extends unfailing strength and reliability for a full breadth of heavy-duty storage needs, setting a high bar in quality and durability for competing slides in its weight…
Come extra-prepared with tools for your undermount solution. Compatible with our 3135EC model, the Eclipse Tool Kit quickens and simplifies drawer box prep with all the tools you need to drill and pre-drill holes and mounting locations for your frames and fixtures. Setting up your project for easy success, the Eclipse Tool Kit is equipped with the following helpers: * 3/32” Drill Bit: This bit works with the Accuride Drilling Jig (4180-0568-XE) to pre-drill holes for disconnect levers. * 4 + ¾”…
Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 20” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.
Reverse rear-mounting bracket for use with 1029 slide.
Compatible with our 1332 solution and accommodating pocket doors ¾” to 13/16” thick, this hinge kit provides the extra tools you need for an inset installation. Each order includes two 35mm salice black clip-on hinges, two 3mm mounting base plates, two 3mm hinge base spacers, two hinge arm cover caps, four #6 x ⅝” Phillips flat head screws, and one “Caution” door sticker.
