Test Suggestion 3
- Products (72)
- Blogs (9)
- Videos (13)
- Newsroom (3)
- Resource Center (3)
-
…vehicles, and even ATMs. * Supports loads up to 600 lbs. * For drawers up to 42” wide with slide lengths up to 60" * 9301E accessory bracket kits offer bottom and side mount installation options * For additional technical information see below Tested for a total of 50,000 cycles at maximum load capacity, the 9301E solution extends unfailing strength and reliability for a full breadth of heavy-duty storage needs, setting a high bar in quality and durability for competing slides in its weight…
…heavier or wider drawers. * Includes soft-close action * Handles load up to 150 lbs. * Supports drawer widths up to 36 in. * Made with High-Strength Low-Alloy steel The 3932EC is an ideal movement solution for home and office cabinetry, metal enclosures, and medical carts. This slide comes AWI- and BHMA-certified, RoHS-compliant, and tested to 50,000 cycles. As with all Accuride products, the 3932EC includes a Limited Lifetime Warranty. For an option without Easy-Close, see the 3932 standard.
…instead of) its light-duty counterpart for heavier or wider drawers. * Handles load up to 150 lbs. * Supports drawer widths up to 36 in. * Made with High-Strength Low-Alloy steel The 3932 is an ideal movement solution for home and office cabinetry, metal enclosures, and medical carts. The 3932 comes AWI- and BHMA-certified, RoHS-compliant, and tested to 50,000 cycles. As with all Accuride products, the 3932 includes a Limited Lifetime Warranty. For a soft-close option, see the 3932EC Easy-Close.
Come extra-prepared with tools for your undermount solution. Compatible with our 3135EC model, the Eclipse Tool Kit quickens and simplifies drawer box prep with all the tools you need to drill and pre-drill holes and mounting locations for your frames and fixtures. Setting up your project for easy success, the Eclipse Tool Kit is equipped with the following helpers: * 3/32” Drill Bit: This bit works with the Accuride Drilling Jig (4180-0568-XE) to pre-drill holes for disconnect levers. * 4 + ¾”…
Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 20” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.
Reverse rear-mounting bracket for use with 1029 slide.
Compatible with our 1332 solution and accommodating pocket doors ¾” to 13/16” thick, this hinge kit provides the extra tools you need for an inset installation. Each order includes two 35mm salice black clip-on hinges, two 3mm mounting base plates, two 3mm hinge base spacers, two hinge arm cover caps, four #6 x ⅝” Phillips flat head screws, and one “Caution” door sticker.
Compatible with our 1432 solution and accommodating pocket doors 15/16” to 1 + ¼” thick, this hinge kit provides the extra tools you need for an inset installation. Each order includes two 40mm salice zinc clip-on hinges, two 3mm mounting base plates, two 3mm hinge base spacers, two silver hinge arm cover caps, four #6 x ⅝” zinc flat head screws, and one “Caution” door sticker.
Compatible with the 3160EC Eclipse Undermount slide for drawers up to 42” wide, this drawer stabilizer kit provides strength and stability for wider drawers while also eliminating racking, side-to-side movement, and hardware failure. Comprised of two stabilizer carrier strips, the installer attaches the included connector clips and pulley bracket for a trouble-free process and extra-durable finished fixture.
Lending a hand with overlay installation for your pocket and flipper door applications, this optional clip-on hinge kit is compatible with Accuride models 123 and 1234. Each kit includes two zinc 40mm overlay clip-on hinges, 2 base plates, four #6 screws, four #8 screws, and one “Caution” sticker.
Compatible with our 123 Flipper Door Slide, this inset base kit includes black 35mm clip-on hinges as well as #6, #8, and M6 Euro screws--plus pivot blocks and one “Caution” sticker.
A bracket kit for allowing the 2132 to be mounted into face frame cabinets.
