Test Suggestion 6
- Products (68)
- Blogs (4)
- Videos (5)
- Newsroom (1)
- Resource Center (2)
…elements of the slide to produce smooth and consistent linear movement, the 115 model is a versatile solution that provides support, guidance, or adjustment in a wide array of industrial fixtures and machines. * Supports loads up to 132 lbs. * For additional technical information see below Tested at 10,000 cycles per pair to guarantee unerring strength and endurance, the 115 linear motion slide remains flexible to specific and unique designs with flat-, side-, and vertical-mounting capabilities.
-
…vehicles, and even ATMs. * Supports loads up to 600 lbs. * For drawers up to 42” wide with slide lengths up to 60" * 9301E accessory bracket kits offer bottom and side mount installation options * For additional technical information see below Tested for a total of 50,000 cycles at maximum load capacity, the 9301E solution extends unfailing strength and reliability for a full breadth of heavy-duty storage needs, setting a high bar in quality and durability for competing slides in its weight…
-
…found on the Tera 100 Supercomputer, the most powerful system in Europe. With its handy lock-out feature, this slide guarantees security and stability during maintenance and service for electronic enclosures. * Supports loads up to 115 lbs. * Tested chassis width at 16” * Designed for 1U-3U chassis * For additional technical information see below Offering over-travel for full wiring and connection access as well as adjustable mounting brackets to accommodate a wide array of depths, rail…
Compatible with our 123 Flipper Door Slide, this inset base kit includes black 35mm clip-on hinges as well as #6, #8, and M6 Euro screws--plus pivot blocks and one “Caution” sticker.
Return to 116RC Product Detail Report Available as a single component or within a kit for our 116RC Linear Track System, this cassette model is crafted with stainless steel ball bearings for added strength, providing unerring endurance to your design’s overall function. Easy-to-install and available for flat- or side-mounting, this stainless steel ball bearing carriage adds heavy-duty seamless, smooth motion to your aluminum track hardware.
Return to 116RC Product Detail Page Extra Quiet + Renowned Quality. Sold as a single, extra component or within the 116RC kit, this cassette provides flawless, linear motion to aluminum track systems with the use of polymer bearings that guarantee silenced operation. Easy-to-install and available for flat- or side-mounting, this polymer ball bearing carriage adds smooth and reliable motion to your hardware of choice.
Return to 116RC Product Detail Page Ensuring ease from start to finish. Engineered specifically for the 116RC model, these aluminum end stops ensure that your linear track system ends its length of travel safely and soundly--without slamming or rattling shut. Each order comes with two end stops crafted from corrosion-resistant aluminum and two screws for a breezy installation.
Return to 116RC Product Detail Page Extra smooth movement and proven endurance. Specially engineered for the 116RC Sliding Door Hardware Kit, this door bracket kit helps protect your linear track system’s carriages when a damper (CB0116-DAMP) is installed to cushion a fixture’s end of travel.
Return to 116RC Product Detail Page The sum of its parts. A component within the Sliding Door Hardware Kit for the 116RC Heavy-Duty Linear Track System, this 142” fascia is crafted from anodized aluminum and clips onto its support beam (AL0116-SUPPRC) for a sleek, completed design. For extra easy-access, an installer can lift and hook the fascia open to reach the track and fittings responsible for linear motion.
Made to accompany our 3135EC, this bracket kit aids in easy-access installation for rear-facing frames and fixtures in need of concealed hardware. Including two rear brackets with a clear zinc finish, this kit also contains six #8 x ⅝” screws and an installation guide--all inside a polybag. This kit is also RoHS-compliant and available for bulk orders.
Return to 116RC Product Detail Page For robust hardware with a soft side. An optional component for our 116RC Heavy-Duty Linear Track System, this damper cushions and decelerates the last 1.6” of your hardware’s travel for reduced vibration and migration while also providing a smooth, gentle return every time. With the use of this optional damper, end stops are no longer required. However, recycling brackets (SS0166-BRKT01RC) will be needed to protect the carriages, and sliding door fixtures…
Return to 116RC Product Detail Page Finishing touches for sliding door hardware. Engineered for the 116RC Door Hardware Kit, these fascia end caps stabilize the anodized aluminum fascia board on its support beam, specifically for use with track systems on sliding doors. Each order comes with two fascia end caps and eight screws for a thorough installation and robust solution.
