Track System

VIEW AS:
Grid List

Items 1 - 12 of 30

per page
  1. Seamless movement paired with infinite possibilities. The endlessly versatile 115RC Linear Track System contains lightweight, corrosion-resistant tracks that can be side, flat, or vertically mounted—offering reliable guidance to movable walls, sliding racks, screens, panels, partitions, and even assembly lines. * Supports loads up to 265 lbs. * Aluminum tracks available in two lengths: 47" and 94,” with or without pre-drilled holes Purchase of the 115RC requires the following components:…

  2. …movable walls, barn doors, and so much more. * Supports loads up to 793 lbs. * Aluminum track in a choice of two lengths: 94.5" and 142" Purchase of the 116RC requires the following components Carriage (Min. Quantity: 1) * SS0116-CASSRC: Carriage – Stainless Steel Balls * CB0116-CASSRC: Carriage – Polymer Balls Track (Min. Quantity: 1) * AL0116-024RC: 94.5" Aluminum Track * AL0116-036RC: 141.7" Aluminum Track NOTE: Purchase of optional Aluminum End Stop (AL0116-STOPRC) requires Recycling Bracket…

  3. The Accuride LA1815 is a pre-assembled linear track system for light-duty applications. Installers simply mount the track in place onto the cabinet/outer member, then mount a sliding door, panel, or over onto the cassette. * Max Load Rating (Static): 18 lbs. * Max Load Rating (Dynamic): 7 lbs. As with all Accuride products, the LA1815 comes backed by a Limited Lifetime Warranty.

  4. The Accuride 118RC Medium-Duty Linear Track System is your go-to movement solution for sliding entries up to 800 pounds. This system uses innovative and durable cassettes within an aluminum track to deliver effortless linear movement. The 118RC is also extra-versatile by design, allowing you to mount sideways, flatly, or underhung with no negative effect on performance. * Max Load: 800 lbs. * Available Length(s): 94.5 in. Choose from two cassette options: a version with stainless steel balls for…

  5. …developed tilt track system that specializes in (but is not limited to) over-the-shoulder storage, the AL4190 solution guarantees full-viewing and easy-access to stowed-away items in a variety of settings, including supply and equipment storage on vehicles, in warehouses, and inside garages. * Supports loads up to 140 lbs. * For drawers up to 40” wide * Aluminum track in lengths of 24" and 40" * For additional technical information see below * Kit contains: 2 Aluminum Tracks, track cover caps,…

  6. …self-lubricating carriage and rail to bring motion to your designs—rather than ball bearings in traditional slides and linear track systems. With multiple adjust options (Auto, Non, and Manual) as well as corrosion-resistant aluminum, this friction guide can handle any task and endure the harshest environments. * Supports loads up to 4,000N (900 lbf.) * Aluminum track available in two lengths: 1 meter or 2 meters. * For additional technical information see below Like the 115RC, the FG115’s…

  7. The 94.5-inch Track is a key part of the Accuride 118RC Medium-Duty Linear Track System. Each aluminum track measures 94.5 inches (or 2.4 meters) that you can cut or combine with other 118RC tracks for any desired length. You can even drill holes for your unique mounting needs!

  8. AL0118-STOPRC 118RC End Stop
    $53.60

    The 118RC End Stop halts your sliding door or panel to prevent it from damaging surfaces outside the edge of a linear track. This End Stop is a necessary part of the broader Accuride 118RC Medium-Duty Linear Track System.

  9. SS0118-BRKTRC 118RC Recycling Bracket
    $60.68

    The 118RC Recycling Bracket magnetically resets the Damper for doors and panels equipped with the Accuride 118RC Medium-Duty Linear Track System. The Recycling Bracket works in tandem with the Damper. Both are simple clip-on accessories: No screws needed!

  10. Return to 116RC Product Detail Page Ensuring ease from start to finish. Engineered specifically for the 116RC model, these aluminum end stops ensure that your linear track system ends its length of travel safely and soundly--without slamming or rattling shut. Each order comes with two end stops crafted from corrosion-resistant aluminum and two screws for a breezy installation.

  11. Return to 116RC Product Detail Page Extra smooth movement and proven endurance. Specially engineered for the 116RC Sliding Door Hardware Kit, this door bracket kit helps protect your linear track system’s carriages when a damper (CB0116-DAMP) is installed to cushion a fixture’s end of travel.

  12. Return to 115RC Product Detail Page Ensuring ease from start to finish. Sold separately or within either 115RC kit (4180-0756-XE/4180-0746-XE), these aluminum end stops ensure that your linear track system ends its length of travel safely and soundly--without slamming or rattling shut. Each order comes with one end stop crafted from corrosion-resistant aluminum and two screws for a breezy installation.

VIEW AS:
Grid List

Items 1 - 12 of 30

per page