Installation
- Products (83)
- Blogs (8)
- Videos (11)
- Newsroom (7)
- Resource Center (1)
…stores. * Side-mount load capacity up to 200 lbs. per pair with drawer width of 42" * Flat mount load capacity up to 75 lbs. per pair with drawer width of 24" * Recommended drawer box size 1 + 9/16" less than the cabinet opening * For additional technical information see below With the same cabinet hole pattern as models 3832 and 3834, along with a disconnect lever, installation and removal are now more accessible than ever--saving your precious time and energy in high-production environments.
A rear bracket for installing the 3732 into face frame cabinets.
Rear bracket for installing 3832 Touch-Release slides into face frame cabinets. Each kit includes: * Compatible with 3832ETR and 3832EHDTR
The 115RC Brackets let installers mount sliding doors onto an Accuride 115RC Linear Track System. Installers simply mount the brackets onto 115RC cassettes with loads distributed evenly to eliminate unwanted torsional effects and ensure smooth movement. The brackets accommodate various door widths and come in three options for door thicknesses up to 40 mm (or 1.57").
The 115RC Brackets let installers mount sliding doors onto an Accuride 115RC Linear Track System. Installers simply mount the brackets onto 115RC cassettes with loads distributed evenly to eliminate unwanted torsional effects and ensure smooth movement. The brackets accommodate various door widths and come in three options for door thicknesses up to 40 mm (or 1.57").
The 115RC Brackets let installers mount sliding doors onto an Accuride 115RC Linear Track System. Installers simply mount the brackets onto 115RC cassettes with loads distributed evenly to eliminate unwanted torsional effects and ensure smooth movement. The brackets accommodate various door widths and come in three options for door thicknesses up to 40 mm (or 1.57").
Rear bracket for face frame installation, compatible with 3832EC
Return to 116RC Product Detail Page Extra smooth movement and proven endurance. Specially engineered for the 116RC Sliding Door Hardware Kit, this door bracket kit helps protect your linear track system’s carriages when a damper (CB0116-DAMP) is installed to cushion a fixture’s end of travel.
Return to 116RC Product Detail Page Extra protection + Quality assurance. Engineered specifically for the 116RC model, this recycling bracket protects the carriages on your linear track system when a damper (CB0116-DAMP) is installed to cushion a fixture's end of travel. One recycling bracket is needed for each recirculating ball carriage.
Compatible with the 3160EC Eclipse Undermount slide for drawers up to 42” wide, this drawer stabilizer kit provides strength and stability for wider drawers while also eliminating racking, side-to-side movement, and hardware failure. Comprised of two stabilizer carrier strips, the installer attaches the included connector clips and pulley bracket for a trouble-free process and extra-durable finished fixture.
The Accuride LA1815 is a pre-assembled linear track system for light-duty applications. Installers simply mount the track in place onto the cabinet/outer member, then mount a sliding door, panel, or over onto the cassette. * Max Load Rating (Static): 18 lbs. * Max Load Rating (Dynamic): 7 lbs. As with all Accuride products, the LA1815 comes backed by a Limited Lifetime Warranty.
The Self-Leveling Door Bracket lets you use the Accuride 118RC Medium-Duty Linear Track System with sliding doors. Like all innovations from Accuride, the bracket’s specialties don’t end there: A novel design keeps your door level for smooth and steady motion. You can even install this accessory in as few as three steps! (See the technical sheet under “Downloads” for more information.)