Installation
- Products (82)
- Blogs (8)
- Videos (11)
- Newsroom (7)
- Resource Center (1)
Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 16” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.
Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 18” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.
Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 20” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.
-
Easy-install for access to hard-to-reach items. Designed with bent-down tabs for a quick, seamless installation, the 322 model is an over-travel solution for trays, shelves, and drawers in kitchens and homes, as well as casework and commercial-grade fixtures. * Supports loads up to 100 lbs. * For drawers up to 16” wide * For additional technical information see below With the added benefit of silenced operation, the 322 is also ideal for pull-out surfaces in a variety of settings and workspaces,…
Precision and ease collide with our Eclipse Jig! Compatible with our 3135EC undermount solution, the Eclipse Drill Jig lends an extra hand for seamless installation, aiding in lever-disconnect assemblies, drawer hooks, front face frame holes, and front side mounts (37mm). For optimal ease and outcomes, we recommend also using the 3/32” Drill Bit (in the optional Eclipse Tool Kit) to control drill depth when drilling.
Compatible with models 1332 and 1432, this carrier strip kit is sold separately from D-Pack hardware kits and optimizes pocket and flipper door installation. Each kit includes two black hinge carrier strips, 3 stainless steel connector clips, six #8 x ⅜” black pan head screws (without hinge base plate), six #8 x ⅝” zinc flat head screws (with hinge base plate), and one “Caution” sticker.
Compatible with models 1332 and 1432, this carrier strip kit is sold separately from D-Pack hardware kits and optimizes pocket and flipper door installation. Each kit includes two zinc hinge carrier strips, 3 stainless steel connector clips, six #8 x ⅜” black pan head screws (without hinge base plate), six #8 x ⅝” zinc flat head screws (with hinge base plate), and one “Caution” sticker.
Compatible with our 1432 solution and accommodating pocket doors 15/16” to 1 + ¼” thick, this hinge kit provides the extra tools you need for an inset installation. Each order includes two 40mm salice zinc clip-on hinges, two 3mm mounting base plates, two 3mm hinge base spacers, two silver hinge arm cover caps, four #6 x ⅝” zinc flat head screws, and one “Caution” door sticker.
Using a greater stay-closed action than the standard 3832ESC, the 3832EHDSC model has been enhanced to accommodate productivity powerhouses--including upscale commercial, mobile, and institutional spaces. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below Including silenced operation and easy-installation, this self-closing movement solution offers ultra-convenience as well as seamless professionalism to mobile carts, home cabinets,…
-
…in office storage while also bringing its smooth and silent motion to box drawers in kitchens, bathrooms, and other establishments. * Supports loads up to 100 lbs. * For drawers up to 16” wide * For additional technical information see below With front face frame mounting holes and a push latch disconnect, installation, disassembly, and reinsertion remain effortless. This light-duty yet robust hardware solution is also fitted with a hold-in detent to prevent drawer roll-out and bounce-back.
Medium-duty load bearing for your metal fixtures. Engineered with pocket and bayonet mounting for a quick, tool-less installation, the 3320 model adds full-extension, linear motion to wider drawers and trays in supply cabinets, workbenches, and other industrial applications. * Supports loads up to 120 lbs. * Tested drawer width at 24” * For additional technical information see below Non-disconnect to ensure safety in workspaces and stations, the 3320 also includes silenced operation and a…
-
Vast capabilities without sacrificing top-quality. Equipped with a pocket & bayonet mount that provides tool-less installation, along with silenced operation and sequential action, the 3620 model is perfect for heavy-duty lateral filing units with extra-wide drawers. * Supports loads up to 200 lbs. * Tested drawer width at 42” * For additional technical information see below Supplying over-travel for full access to stored items and information as well as a non-disconnect feature for added safety…
